BMW 428i Gran Coupe Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a BMW 428i Gran Coupe Fuel Pump Replacement is $918 with $652 for parts and $266 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 BMW 428i Gran CoupeL4-2.0L TurboService typeFuel Pump ReplacementEstimate$1598.42Shop/Dealer Price$1936.37 - $2923.29
2016 BMW 428i Gran CoupeL4-2.0L TurboService typeFuel Pump ReplacementEstimate$1581.30Shop/Dealer Price$1913.38 - $2895.89
Show example BMW 428i Gran Coupe Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Michael

22 years of experience
391 reviews
Michael
22 years of experience
BMW 428i Gran Coupe L4-2.0L Turbo - Oil Change - Moreno Valley, California
Send Michael every time! Professional. Knowledgeable.

Scott

37 years of experience
995 reviews
Scott
37 years of experience
BMW 428i Gran Coupe L4-2.0L Turbo - Oil Change - Queen Creek, Arizona
He is honest and efficient. Good ex0eriencr using these services.

John

21 years of experience
650 reviews
John
21 years of experience
BMW 428i Gran Coupe L4-2.0L Turbo - Pre-purchase Car Inspection - Orlando, Florida
Very thorough, expert knowledge.

Alex

21 years of experience
160 reviews
Alex
21 years of experience
BMW 428i Gran Coupe L4-2.0L Turbo - Brake Pads Replacement (Rear) - Lombard, Illinois
Alex was very friendly and very fast with the work he did! 10/10. He came on twice twice now and was very professional and courteous!

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of BMW 428i Gran Coupe services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P0247 OBD-II Trouble Code: Turbocharger Wastegate Solenoid B Malfunction
P0247 P0247 code definition The P0247 code indicates that there is a turbocharger wastegate solenoid B malfunction. What the P0247 code means When the P0247 code appears on your vehicle, it means that the powertrain control module has found readings...
P3492 OBD-II Trouble Code: Cylinder 12 Deactivation/Intake Valve Malfunction
P3492 P3492 code definition P3492 is the fault code for what’s known as Cyl12 Deactivation/Intake Valve Ctrl Circ High. Cyl12 specifies that the issue is likely taking place in engine cylinder number 12. In some Dodge vehicles, this code indicates...
Child Seat Safety Laws in Virginia
When When you secure your child in a properly installed child seat, you reduce his or her chances of being injured in a motor vehicle accident by 69%, and of being killed by 71%. It just makes sense to obey...

Key stuck in ignition of 2012 Chevrolet Impala

There is a common problem with this vehicles wiring harness that connects to the shifter. One of the wires has broke and lost its connection and will not engage the ignition release solenoid. I would recommend having a technician from...

My car randomly shuts off - 2007 Nissan Sentra

Hello. You'll need to start by having the battery load-tested and charging system checked. You may need to clean the battery terminals (https://www.yourmechanic.com/article/how-to-clean-battery-terminal-connections-on-a-car) of any corrosion since this may explain the intermittent no crank with just clicking. Your starter may...

My hyundai santa fe 2.0 diesel 2002 bounce bounces around and no the engine has a loss of power.

Hi there. With the limited information that is given about your vehicle, check the engine to see if the air filter is plugged. A plugged air filter will make the engine starve for fuel and air and will cause the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com