BMW 328Ci Serpentine/Drive Belt Replacement Costs

Car	Service	Estimate	Shop/Dealer Price
2000 BMW 328CiL6-2.8L	Service typeSerpentine/Drive Belt Replacement	Estimate$304.26	Shop/Dealer Price$347.88 - $464.55

Car

Service

Estimate

Shop/Dealer Price

2000 BMW 328CiL6-2.8L

Service typeSerpentine/Drive Belt Replacement

Estimate$304.26

Shop/Dealer Price$347.88 - $464.55

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

When to consider replacing the serpentine belt:

Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(248)

Rating Summary

237

SEE REVIEWS NEAR ME

Robert

32 years of experience

646 reviews

Request Robert

by Chris

BMW 328Ci L6-2.8L - Service Light is on - San Jose, California

Robert is an excellent and expert mechanic . His knowledge of vehicles as well as his extremely professional manner make him a great choice to work on your vehicle . He goes above and beyond . I have used him on two jobs, he has always called the night before to touch base, and then is always prompt and courteous. He is awesome . Not only is he a great and master mechanic but also a great person . We are lucky to have him work and repair our vehicles .

Tony

15 years of experience

121 reviews

Request Tony

by Cheryl

BMW 528i L6-2.8L - Serpentine/Drive Belt Replacement - Oakland, California

Tony was excellent! He was so knowledgeable, thorough, and trustworthy, that the building manager (Mercedes owner) was impressed, stood around asking questions, saying how hard it is to get a good mechanic. Tony was very kind to my 8-year-old daughter. Nice guy. He was down to business, quickly and efficiently working, then we got to chat a bit. He did not waste time. I feel more empowered about my older BMW. He offered money-saving tips for how to fix things on my car slowly over a long period of time. He offered advice on what to tell AAA. He voluntarily showed me the old part and the cost of new parts online. He was the best mechanic I could imagine having. Tony turned a miserable and stressful experience into a pleasurable afternoon filled with learning opportunities. I recommend him for women. He's safe. He won't rip you off. I have already recommended him to neighbors and friends.

Jeff

34 years of experience

441 reviews

Request Jeff

by Robert

BMW 650i V8-4.8L - Serpentine/Drive Belt - Granite Bay, California

Friendly and skilled. I enjoyed meeting and working a bit with Jeff. He has the tenacity and temperment needed to work on a BMW and complete the job. We had some parts issues, but Jeff solved these. Due to his non-ASE certification, Jeff cannot repair what he determined to be a faulty water pump. I'm leaving 3 stars because he told me he would fix this, but I'm unable to schedule this repair with Jeff or any of your mechanics. Why?? Also, cleanup and test drive was left to me. Why??

Phillip

13 years of experience

43 reviews

Request Phillip

by Debra

BMW X3 L6-3.0L - Serpentine/Drive Belt - Orlando, Florida

Phillip was very professional and very nice would appreciate if he could service my vehicle again

BMW 328Ci Serpentine/Drive Belt Replacement at your home or office.

Estimate price near me

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a BMW 328Ci Serpentine/Drive Belt Replacement is $215 with $75 for parts and $140 for labor. Prices may vary depending on your location.

What is a serpentine belt and how does it work?

When to consider replacing the serpentine belt:

How do mechanics replace the serpentine belt?

Is it safe to drive with a serpentine belt problem?

When replacing the serpentine belt keep in mind:

Meet some of our expert BMW mechanics

Excellent Rating

Rating Summary

Robert

Tony

Jeff

Phillip

Excellent Rating

Rating Summary

Recent articles & questions

Second time on same wheel 4 or more of 6 lug nuts snapped off while driving

Clunk sound when I set on reverse and when I let go of gas pedal. Rattle noise has been increasing over bumps.

Can someone help me pls?

How can we help?