BMW 325Ci Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(111)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(111)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a BMW 325Ci Power Steering Pump Replacement is $773 with $423 for parts and $350 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 BMW 325CiL6-2.5LService typePower Steering Pump ReplacementEstimate$1234.30Shop/Dealer Price$1461.75 - $2108.66
2005 BMW 325CiL6-2.5LService typePower Steering Pump ReplacementEstimate$1328.78Shop/Dealer Price$1577.75 - $2306.61
2003 BMW 325CiL6-2.5LService typePower Steering Pump ReplacementEstimate$1328.78Shop/Dealer Price$1577.86 - $2306.81
2004 BMW 325CiL6-2.5LService typePower Steering Pump ReplacementEstimate$1328.78Shop/Dealer Price$1577.85 - $2306.80
2006 BMW 325CiL6-2.5LService typePower Steering Pump ReplacementEstimate$1328.78Shop/Dealer Price$1584.30 - $2318.08
2001 BMW 325CiL6-2.5LService typePower Steering Pump ReplacementEstimate$1211.78Shop/Dealer Price$1432.22 - $2073.88
Show example BMW 325Ci Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(111)

Rating Summary
104
4
0
1
2
104
4
0
1
2

Miguel

19 years of experience
165 reviews
Miguel
19 years of experience
325Ci 2005 - Oxygen Sensor - Fair Lawn, NJ
Miguel was quick and efficient, did a good job replacing my precat O2 sensors

Eduardo

15 years of experience
528 reviews
Eduardo
15 years of experience
325Ci 2004 - Fuel Pump - Pearland, TX
Eduardo was on time and accurate about the repair and did great work! Thank you!!

Robert

17 years of experience
269 reviews
Robert
17 years of experience
325Ci 2004 - PCV Valve Hose - Highlands, TX
Was very professional and did a great job. Great mechanic

Michael

0 years of experience
243 reviews
Michael
0 years of experience
325Ci 2002 - Coolant is leaking - Henderson, NV
Michael was prompt and professional.

Excellent Rating

(111)

Rating Summary
104
4
0
1
2
104
4
0
1
2
Number of BMW 325Ci services completed
1221+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Program a Replacement Keyless Entry Remote for a GM Car
Keyless Keyless entry systems have become a staple in the automotive world, and their use is as widespread as power windows. The remote is programmed to work with one specific vehicle, and the vehicle will usually come from the factory...
Windshield Laws in Wyoming
Driving Driving on the roadways in Wyoming requires motorists to follow all traffic laws. In addition, there are also rules that govern the equipment on your vehicle. Below are the windshield laws in Wyoming that motorists must follow when driving...
A Buyer’s Guide to the 2012 Acura TSX SportWagon
The The 2012 Acura TSX SportWagon has the perfect combination of utility and performance. The vehicle is pleasant to drive and makes luxury a priority. The TSX SportWagon uses electrically boosted power steering, which provides you with more stability driving...

what size is my serpentine belt - 2003 Dodge Dakota

Hello. According to my resources, the serpentine belt size for your vehicle with the 3.9 liter engine is 97.3 inches long and 0.96 inches wide. The belt should also have seven grooves in it. The Dayco part number for this...

I shifted my Jeep from 4Hi to 4lo and when I put it in drive the tires are not moving.

Does the engine just rev and the vehicle does not move? Generally this indicates some kind of slip in the transmission but may also be caused by a low fluid level. Have the fluid level and condition checked first and...

Just had wheel speed sensor replaced, is the replacement of wheel bearings something I must do right away 2012 Chevrolet Impala

Hello. Unless the bearings are actually failing and making noise then they do not need to be replaced. I usually get the vehicle in the air and spin the bearings to listen for any noise or fell for any roughness....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com