BMW 323i Camshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(68)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(68)

Camshaft Position Sensor Replacement Service

How much does a Camshaft Position Sensor Replacement cost?

On average, the cost for a BMW 323i Camshaft Position Sensor Replacement is $318 with $178 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 BMW 323iL6-2.5LService typeCamshaft Position Sensor ReplacementEstimate$800.70Shop/Dealer Price$968.43 - $1457.43
1998 BMW 323iL6-2.5LService typeCamshaft Position Sensor ReplacementEstimate$501.39Shop/Dealer Price$593.45 - $862.41
1999 BMW 323iL6-2.5LService typeCamshaft Position Sensor ReplacementEstimate$791.69Shop/Dealer Price$956.37 - $1443.08
Show example BMW 323i Camshaft Position Sensor Replacement prices

What is the Camshaft Position Sensor all about?

The camshaft position sensor monitors the position of the camshaft and reports that data to the car’s onboard computer system. This computer system works with sensors and other devices to keep the engine running. With data from the camshaft position sensor (CPS), the fuel injectors know when to fire.

When the sensor malfunctions, the computer does not know when to fire the injectors and may not fire them at all. The faulty readouts may also throw off spark timing, which will affect the car’s fuel economy. This sensor is used in conjunction with the crankshaft position sensor to control ignition timing. It is common for heat and oil leaks to cause this sensor to fail, due to where the sensor is located.

Keep in mind:

  • Damage to the camshaft position sensor is often caused by oil leaks; if this is the case, you may need another part of your car replaced or repaired.
  • When the camshaft position sensor is replaced, the alignment of the timing belt should be monitored so that no fluids leak onto the position sensor mounting area.
  • Some camshaft position sensors will need to have their software updated when they are installed.
  • Timing belts, mass air flow sensors, and crankshaft position sensors can all trigger the trouble code for the camshaft position sensor.

How it's done:

  • Scan test computer for trouble codes.
  • Pinpoint tests as per flow charts.
  • Remove and replace Crankshaft Position Sensor.
  • Clear trouble codes.
  • Check for proper operation and test drive car.

Our recommendation:

The camshaft position sensor isn’t checked in most regular services, but your vehicle has warning signs for when the sensor begins to fail. Because it sends information to the camshaft, when the sensor begins to fail your engine will begin to have trouble. Your engine may have a hard time turning on, staying on, idling, or running smoothly. Your Check Engine warning light should illuminate as well.

What common symptoms indicate you may need to replace the Camshaft Position Sensor?

  • Car stalls or does not start.
  • Car struggles to accelerate (does not maintain speed).
  • Check Engine light is on.
  • Car misfires.
  • Car stumbles or sputters on startup.
  • Car runs poorly or runs rough.

How important is this service?

The camshaft position sensor provides valuable information about the camshaft position to the computer management system. The computer system uses the information from the position sensor to determine when to inject more fuel. Without the sensor’s information, the computer won’t inject fuel properly, and your vehicle will stall or sputter.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(68)

Rating Summary
62
2
1
0
3
62
2
1
0
3

Chris

15 years of experience
2435 reviews
Chris
15 years of experience
323i 2000 - Clutch Master Cylinder - Irvine, CA
went above and beyond for us. thank you!

David

0 years of experience
736 reviews
David
0 years of experience
323i 2000 - Car overheats quickly - Davis, CA
David was prompt and thorough. He quickly diagnosed the problem with my 2000 BMW 323i. I thought for sure I was going to have to replace my radiator and water pump but it ends up I had a cracked coolant reservoir. He made notes of things I will need to have serviced in the future as well. He did all this after dark which is impressive. I would definitely recommend David to others as he seems to know a lot.

Excellent Rating

(68)

Rating Summary
62
2
1
0
3
62
2
1
0
3
Number of BMW 323i services completed
748+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How Long Does an Anti-Lock Brake (ABS) Fluid Level Sensor Last?
Your Your ABS system works both by means of electricity and hydraulic pressure. Fluid levels need to be monitored at all times, and that is the job of the ABS fluid level sensor. Located in the master cylinder, the ABS...
How Are Car Sensors Protected From Heat and Debris?
Reliable car performance depends on sensors to collect and relay data. Some car sensors can be cleaned to make them work reliably again.
How Long Does an Injector Control Pressure Sensor Last?
A A diesel engine is a very sensitive and complicated piece of machinery. Getting a diesel to crank will require a number of parts to work together. Among the most vital systems on a diesel engine is the fuel injection....

How Often Does the Mass Air Flow Sensor Need to Be Replaced?

Mass airflow sensors (MAF) have no expiration date. They are not included on the manufacturer’s scheduled maintenance list of things to replace based on mileage, like spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement) or filters. They can remain in service indefinitely as long as...

93 Oldsmobile Cutlass supreme won't start.

Hi there. Check the camshaft (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) and crankshaft (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) position sensors and make sure that they are plugged in. If the engine is cranking but not starting then the crankshaft position sensor could have failed. Also, check the mass air...

Check engine light is on with error code P052B. Reset the ECM 3 times. Car is running fine. What could be wrong?

Hi there. The code is on for multiple different sensors that you would need to check. Check for a faulty Crankshaft position sensor, a faulty Camshaft position sensor, a faulty intake valve timing control solenoid valve, or a faulty intake...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com