BMW 320i xDrive Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(17)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(17)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a BMW 320i xDrive Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 BMW 320i xDriveL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2015 BMW 320i xDriveL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2014 BMW 320i xDriveL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2018 BMW 320i xDriveL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2013 BMW 320i xDriveL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2016 BMW 320i xDriveL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example BMW 320i xDrive Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0

Joel

11 years of experience
149 reviews
Joel
11 years of experience
BMW 320i xDrive L4-2.0L Turbo - Valve Cover Gasket - The Colony, Texas
Awesome Work

Jarius

21 years of experience
49 reviews
Jarius
21 years of experience
BMW 320i xDrive L4-2.0L Turbo - Oil Change - Rockville, Maryland
Punctual and professional mechanic. Did a great job!

James

30 years of experience
877 reviews
James
30 years of experience
BMW 320i xDrive L4-2.0L Turbo - Oil Change - Kissimmee, Florida
Great service.

Jerome

34 years of experience
206 reviews
Jerome
34 years of experience
BMW 320i xDrive L4-2.0L Turbo - Oil Change - Rockville, Maryland
Jerome was punctual and extremely professional. He gave me great advice on how to service my car in the future. I strongly recommend him.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0
Number of BMW 320i xDrive services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

Where Is the O2 Sensor Located?
Oxygen Oxygen sensors O2 sensors (https://www.yourmechanic.com/article/where-is-the-o2-sensor-located) will always be located in the exhaust system. Their function is to sense how much oxygen remains in the exhaust that is flowing out of the engine, and report that information to the vehicle’s...
Symptoms of a Bad or Failing Brake Wheel Cylinder
If your car has drum brakes and a spongy brake pedal, poor brake response, and leaking brake fluid, you may need a brake wheel cylinder replacement.
Ram Certified Pre-Owned (CPO) Car Program
Drivers Drivers in the market for a used Ram vehicle may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on to learn...

Knocking noise coming from the crankshaft

The cylinder heads are one part of the complete engine package. As such, when they are rebuilt, other critical components such as connecting rods, bearings, pistons and cylinder sleeves are not replaced. If your head gasket broke, causing water to...

Hello I have a lancer and it just shut off on me driving on the freeway..sounds like its just winding like if there's no belt on i

A possibility is a broken timing belt but there are other common possibilities such as an engine sensor failure, ignition switch failure, fuel pump failure and so forth. The good news is you do not have an intermittent problem but...

I have a 2008 s550 Mercedes Benz. I'm having a hesitant/vibration in between shifts at a moderate acceleration.

Hello. The most common cause of this is a failure in the drive shaft coupling. The coupling begins to fail and this occurs. I would have this checked by a shop that specializes in this as it can be difficult...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com