BMW 230i xDrive Valve Cover Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Valve Cover Replacement Service

How much does a Valve Cover Replacement cost?

On average, the cost for a BMW 230i xDrive Valve Cover Replacement is $1434 with $558 for parts and $876 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 BMW 230i xDriveL4-2.0L TurboService typeValve Cover ReplacementEstimate$2165.78Shop/Dealer Price$2417.74 - $3234.38
Show example BMW 230i xDrive Valve Cover Replacement prices

What is the Valve Cover all about?

Valve Cover – also called a rocker cover – is a vital component of the engine; it’s a plastic or metal component that is bolted to the top of the cylinder head. The gap between the valve cover and the cylinder head is sealed by a valve cover gasket. The whole setup keeps oil inside the engine, which is important to the engine’s overall health and performance.

Keep in mind:

  • Your valve cover gasket and seals will naturally break down over time.
  • The majority of today's valve cover gaskets and seals last up to 60,000 miles provided that oil changes aren't delayed.
  • When a check engine light on it might mean there's an oil leak in the valve cover gasket, hence oil may have caused damage to your ignition.

How it's done:

  • Open the hood and take off the engine cover.
  • Remove valve cover bolts.
  • Check your manual's recommended torque sequence.
  • Part of the valve cover can be sealed by silicone RTV; if so remove silicone RTV entirely.
  • Perform this procedure backwards.
  • Finish the repair with a test drive and check your oil dipstick to ensure appropriate oil level.

What common symptoms indicate you may need to replace the Valve Cover?

  • Engine runs rough or unevenly
  • A decrease in your engine's horse power
  • The smell of burning oil
  • Dirt on your valve cover
  • Oil dripping under the vehicles

How important is this service?

Loose or broken valve covers cause oil to leak out and it's a vital service to avoid extreme engine wear. Without enough oil, there’s excess friction between the fast moving parts and significant break down of parts, leading to potentially expensive damage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Adam

18 years of experience
263 reviews
Adam
18 years of experience
BMW 230i xDrive L4-2.0L Turbo - Brake Pads Replacement (Front) - Boynton Beach, Florida
Know exactly what to, very competent.

Rusty

24 years of experience
567 reviews
Rusty
24 years of experience
BMW 528i L4-2.0L Turbo - Valve Cover - Mansfield, Texas
Always good

Jeremy

21 years of experience
802 reviews
Jeremy
21 years of experience
BMW 528i L6-3.0L - Valve Cover - Lake Worth, Florida
Excellent professional, he knows what he is doing... I will recommend him to every body. Thank you for the service.

Shawn

13 years of experience
379 reviews
Shawn
13 years of experience
BMW 328i xDrive L6-3.0L - Valve Cover - King Of Prussia, Pennsylvania
Shawn was fantastic. Did excellent work.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of BMW Valve Cover Replacement services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P2170 OBD-II Trouble Code: Exhaust Press Regulator Vent Solenoid Control Circuit Low
Trouble code P2170 means the control module the measured values from the MAP, MAF, and TP sensors are not within the correct range.
P2015 OBD-II Trouble Code: Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1
P2015 trouble code definition P2015 is a generic OBD2 diagnostic trouble code point at a malfunction with the intake manifold runner position...
How Long Does a Slave Cylinder Last?
Your Your slave cylinder is within a sealed system, so it will generally last a very long time, and may never have to be replaced. The key word here is, of course “may.” If you’re in the habit of buying...

Transfer case adapter leak.

There should be an output seal between the transmission and the transfer case has an input seal with a gasket in between. If any of these are bad it may leak transmission fluid. I would recommend having a certified technician,...

Is $450 reasonable for a timing belt replacement? I have a 2009 Hyundai Elantra.

Hi there. The average cost for a timing Belt replacement is between $259 and $350. This is determined on how the timing belt is replaced and if there are any other issues when removing the timing belt. The thing to...

Vehicle won't shift into 4th. High rpm at 60 and won't shift but get a pcv code

Too much air flowing into the intake causes the engine to lean out, as a result of too much air in relation to the fuel and misfire. At an idle, the PCV valve restricts air flow, to reduce this problem....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com