BMW 228i Gran Coupe Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,828)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,828)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a BMW 228i Gran Coupe Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 BMW 228i Gran CoupeL4-2.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example BMW 228i Gran Coupe Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(6,828)

Rating Summary
6,369
206
60
45
148
6,369
206
60
45
148

Tomas

17 years of experience
226 reviews
Tomas
17 years of experience
BMW X3 L6-3.0L - Transfer case fluid is dirty - Irvington, New Jersey
He knows the job.

Rodric

14 years of experience
418 reviews
Rodric
14 years of experience
BMW 328i xDrive L6-3.0L - Brake light is not working - Smyrna, Georgia
He was very nice and he didn’t complain about the rain

Bereketeab

7 years of experience
110 reviews
Bereketeab
7 years of experience
BMW X5 L6-3.0L Turbo - Brake Pads Replacement (Rear) - Sacramento, California
Good Experience

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
BMW 325xi L6-3.0L - Oil Change - San Francisco, California

Excellent Rating

(6,828)

Rating Summary
6,369
206
60
45
148
6,369
206
60
45
148
Number of BMW services completed
75108+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does an Ignition Lock Cylinder Last?
For For most car owners, getting in and cranking their vehicle up is not something that they think about. In order for a car to crank properly, a number of different components will have to work together. Among the most...
P0725 OBD-II Trouble Code: Engine Speed Input Circuit Malfunction
P0725 means there is a problem with the engine speed input circuit due to damaged wires, loose connectors or dirty transmission fluid.
How Much Does a Mechanic Make in California?
Automotive technician jobs in California have an average salary of $44K, and the state industry is growing rapidly.

Changing control arm bushings on a 2009 Subaru WRX

Things can change but you'll need to replace it and that is a real pain. On that vehicle, they are very popular. So, you can go to any good aftermarket parts place and get an aftermarket control arm (https://www.yourmechanic.com/parts/control-arm-assembly) with...

My car shakes and jerks back when I accelerate. When stopped at a light vibration through steering wheel it is an Audi A4

Hi there. When you are getting an engine vibration as you described and you have a gas cap warning light issue, then it is likely that you have an issue with an EVAP canister or the purge solenoid. The canister...

98 buick runs perfect when first starting then begins to thunk when it gets warm.

If you are experiencing slow acceleration when the engine is under load, there are a variety of causes that would be considered. Fuel injectors can become clogged over time as the tiny passages become clogged. When an injector is clogged...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com