BMW 2002tii Lights (Headlamps/beams/brakes) Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7)

Lights (Headlamps/beams/brakes) Inspection Service

How much does a Lights (Headlamps/beams/brakes) Inspection cost?

On average, the cost for a BMW 2002tii Lights (Headlamps/beams/brakes) Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1974 BMW 2002tiiL4-2.0LService typeLights (Headlamps/beams/brakes) InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1973 BMW 2002tiiL4-2.0LService typeLights (Headlamps/beams/brakes) InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1971 BMW 2002tiiL4-2.0LService typeLights (Headlamps/beams/brakes) InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1972 BMW 2002tiiL4-2.0LService typeLights (Headlamps/beams/brakes) InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
Show example BMW 2002tii Lights (Headlamps/beams/brakes) Inspection prices

The headlights and brake lights on a vehicle are absolutely essential for safe driving and in many cases it is illegal to drive if they are not functioning correctly. Problems with the light system can range from a simple blown bulb to something more complicated like a faulty socket.

Regardless of the reason, lights that are not functioning can lead to dangerous driving conditions, so the lighting system should be inspected and repaired as soon as possible.

How this system works:

Headlights

There are a number of different types of headlight systems but they all do the same thing: light up the road in front of the vehicle.

In a common halogen system, the headlight housing is where the headlight bulb sits. The inside of the housing is covered with chrome paint that reflects the light down the road. The chrome piece that coves the actual bulb is there to prevent the bulb from blinding oncoming drivers. They are powered by the vehicles electrical system. They can be toggled between a high and low beam. These systems use a halogen bulb.

Brake Lights

Brake lights illuminate when the contacts in the stop light switched are closed. When a driver steps on the brake pedal, this closes the switch, which sends power to the bulbs, which lights up the bulbs.

Common reasons for this to happen:

Brake Lights

  • Blown Fuse: The electrical power for the brake light system passes through a fuse and if the fuse blows, the brake lights will no longer work. While this is usually a simple fix, it could indicate a larger problem. If the same fuses continue to blow, the brake light system should be inspected.

  • Burned Out Bulb: Like any light bulb, vehicle bulbs will burn out over time. At some point in the lifespan of a vehicle the brake light bulbs will have to be replaced. Time frames differ depending on the bulb type. In most states driving with a burned out brake light is illegal.

  • Malfunctioning Brake Light Switch: The brake light switch works like a household light switch. When the brake pedal is depressed it opens the switch to send electricity to the brake lights. If the switch is bad it breaks the connection between the brake lights and the pedal. The brake lights will no longer work, or they can become stuck in the on position.

  • Issue with Bulb Socket: The sockets that the brake light bulbs sit in can be dirty. If the debris builds up on the contacts in the socket it will prevent the bulb from making contacting and it will not light up. In this situation, only one brake light will not be working, it is uncommon for both sockets to become blocked at the same time.

Unplugged Harness: The electrical system that runs the brake light system contains various harness and if one of them becomes unplugged or defective it will affect the brake lights.

Headlights

  • Bad Bulb: Just like the brake lights and every other bulb, eventually the headlights will burn out and need to be replaced. Bulb life varies depending on what type of bulb the vehicle uses. In most cases, if only one headlight is not working, replacing the bulb should be the first step.

  • Blown Fuse: Just like the brake lights, the electrical system that runs the headlights incorporates fuses and if one of them is blown the headlights will not work. If you cannot switch between high and low beams, a fuse could very well be the problem.

  • Bad Relay: If both headlights are not working, the headlight relay is one of the most common causes. The headlight relay is part of the electrical system and if it is malfunctioning, the lights will not get power. The relay will have to be replaced.

  • Bad Headlight Switch: The headlight switch is used to turn on the lights. If the switch is malfunctioning the headlights will not function. If it is impossible to turn the headlights on the car should not be driven at night and should be repaired immediately.

  • Faulty Socket: The socket that the headlight bulb sits in can become dirty or contaminated. If this happens the bulb cannot make the contact it needs to light. In this case, the most common symptom would be one headlight not working.

  • Moisture in Headlight: If the headlights turn on but are not illuminating the road there could be moisture in the in the housing. This will cause fogging and diminished performance of the headlights.

  • Bad Dimmer Switch: The dimmer switch allows the driver to switch between high and low beams. If the switch is malfunctioning the headlights can become stuck on high or low. Headlights stuck on high could be dangerous for on-coming drivers and the problem should be fixed as soon as possible.

What to expect:

A top­-rated mobile mechanic will come to your home or office to determine the source and cause of the headlight or brake light issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

The lights are a major safety component of the vehicle and they should be maintained to ensure safe driving conditions. Malfunctioning lights should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Joseph

27 years of experience
578 reviews
Joseph
27 years of experience
BMW X5 L6-3.0L - Lights (Headlamps/beams/brakes) - Houston, Texas
Awesome mechanic!!! Thanks!!!

James

21 years of experience
51 reviews
James
21 years of experience
BMW 528i L6-3.0L - Lights (Headlamps/beams/brakes) - Dallas, Texas
James was polite, well spoken, and knowledgeable. He gave extra effort to diagnose my car's issue. James was looking out for my best interest, instead of his own. I will definitely use James again.

Matthew

33 years of experience
1222 reviews
Matthew
33 years of experience
BMW X5 L6-3.0L - Lights (Headlamps/beams/brakes) - Norfolk, Virginia
He was very helpful he's a very talented mechanic

James

8 years of experience
128 reviews
James
8 years of experience
BMW 328i L6-3.0L - Lights (Headlamps/beams/brakes) - Decatur, Georgia
Mechanic was very knowledgeable and personable. Would definitely recommend for any of your car services.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of BMW Lights (Headlamps/beams/brakes) Inspection services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does an Ignition Ignitor Last?
The The ignition system of a car is responsible for kicking off the combustion process. Without the ignition coil on your car giving off the necessary spark, the air and fuel mixture in your engine will not be able to...
P2145 OBD-II Trouble Code: Exhaust Gas Recirculation Ventilation Control Circuit High
P2145 P2145 Code Definition A P2145 code is a generic powertrain code related to fuel and air metering and auxiliary emissions controls. This code is stating that the exhaust gas recirculation (EGR) vent control circuit is registering a high input...
P0363 OBD-II Trouble Code: Misfire Detected - Fueling Disabled
P0363 P0363 code definition If the PCM has stored the P0363 code, it indicates that there has been a misfire in a cylinder, and that the PCM has disabled the fuel supply to the malfunctioning cylinder. What the P0363 code...

Over heating

A diagnostic would determine the root cause of the overheating. If the coolant level was low, and/or there was trapped air in the cooling passageways, perhaps related to the radiator replacement, those faults themselves can cause overheating. If the coolant...

rear wiper size

There are a few ways you can determine the rear wiper size of your vehicle. The first way would be to take a tape measure and measure it that way. The number of inches the blade is long is the...

I have 2009 Ford police inceptor... My check [engine](/topics-engine-ford/) light came on.... I got a scanner the code read purge valve was bad.... I changed the purge valve an evr Valve..... I unplugged both cables on the battery post... Drove it for 2 days the check engine light came back on... Check the code purge valve.... Do I need to re set it a different way??

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com