Audi S8 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Audi S8 Car Battery Replacement is $353 with $258 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Audi S8V8-4.0L TurboService typeCar Battery ReplacementEstimate$630.79Shop/Dealer Price$784.74 - $1190.35
2018 Audi S8V8-4.0L TurboService typeCar Battery ReplacementEstimate$619.99Shop/Dealer Price$761.26 - $1162.52
2015 Audi S8V8-4.0L TurboService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$764.78 - $1170.42
2003 Audi S8V8-4.2LService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$764.73 - $1170.32
2008 Audi S8V10-5.2LService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$764.82 - $1170.49
2009 Audi S8V10-5.2LService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$764.78 - $1170.42
2014 Audi S8V8-4.0L TurboService typeCar Battery ReplacementEstimate$615.79Shop/Dealer Price$769.44 - $1174.82
2001 Audi S8V8-4.2LService typeCar Battery ReplacementEstimate$615.79Shop/Dealer Price$770.38 - $1176.45
Show example Audi S8 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Diego

17 years of experience
636 reviews
Diego
17 years of experience
S8 2001 - Serpentine/Drive Belt - Glendale, AZ
Personable, prompt and skilled. I would recommend

Diego

17 years of experience
636 reviews
Diego
17 years of experience
S8 2001 - Electric Problems - Glendale, AZ
Personable, prompt and skilled. I would recommend

Kenneth

6 years of experience
808 reviews
Kenneth
6 years of experience
S8 2008 - Coolant is leaking - Inglewood, CA
Great and knowledgeable about cars

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Audi S8 services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Oil Temperature Sensor
If the temperature gauge gives false readings or does not move, you may need to replace the oil temperature sensor.
New Jersey Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of New Jersey. Speed limits in New Jersey 65 mph: some freeways and interstates 55 mph: shorter length freeways...
P2167 OBD-II Trouble Code: Throttle/Pedal Position Sensor E Maximum Stop Performance
P2167 P2167 code definition Throttle/Pedal Position Sensor E Maximum Stop Performance What the P2167 code means The P2167 code is a general OBD-II diagnostic trouble code (DTC) (https://www.yourmechanic.com/article/what-is-the-on-board-diagnostics-obd-system) that indicates a fault with the throttle / pedal position sensor E...

There is smoke coming from my car hood what is it - 2004 Ford Focus

Hello. This is a sign of a potentially blown cylinder head gasket. Often times, as a result of the car's engine overheating, the cylinder head gasket is compromised which causes oil to leak into the coolant passages and water to...

hi chris... i have a 2002 bmw x5 well taken care of.... light stays on in the car when you turn off key. think it has drained bat

The existing battery should be load tested (https://www.yourmechanic.com/services/battery-is-dead-inspection) and if it fails the battery should be replaced (https://www.yourmechanic.com/services/battery-replacement). The cost of replacement can be obtained by clicking on "Get a Quote" at the foregoing service link (https://www.yourmechanic.com/services/battery-replacement). But, at the...

Hi Yourmechanic proffessionals. I have nissan Altima 2013 Car and recently I gave it for cleaning .after cleaning,I found that my

If the engine compartment was cleaned, perhaps with water, steam, or other methods a possibility is water or contaminant intrusion into critical electrical connectors and/or disturbed electrical connectors. That possibility might be conformed once the loss of power is traced...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com