Audi A8 Quattro Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(93)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(93)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Audi A8 Quattro Front Crankshaft Seal Replacement is $239 with $43 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Audi A8 QuattroV6-3.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$396.20Shop/Dealer Price$430.35 - $504.45
2009 Audi A8 QuattroV8-4.2LService typeFront Crankshaft Seal ReplacementEstimate$371.76Shop/Dealer Price$404.78 - $490.85
2003 Audi A8 QuattroV8-4.2LService typeFront Crankshaft Seal ReplacementEstimate$1613.75Shop/Dealer Price$1927.43 - $2848.71
2013 Audi A8 QuattroW12-6.3LService typeFront Crankshaft Seal ReplacementEstimate$379.10Shop/Dealer Price$407.38 - $477.60
2001 Audi A8 QuattroV8-4.2LService typeFront Crankshaft Seal ReplacementEstimate$1587.13Shop/Dealer Price$1901.11 - $2807.64
2000 Audi A8 QuattroV8-4.2LService typeFront Crankshaft Seal ReplacementEstimate$2765.13Shop/Dealer Price$3367.32 - $5152.62
2015 Audi A8 QuattroW12-6.3LService typeFront Crankshaft Seal ReplacementEstimate$379.10Shop/Dealer Price$407.44 - $477.70
2016 Audi A8 QuattroV6-3.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$378.18Shop/Dealer Price$406.23 - $475.76
Show example Audi A8 Quattro Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(93)

Rating Summary
87
1
1
0
4
87
1
1
0
4

Jason

0 years of experience
417 reviews
Jason
0 years of experience
A8 Quattro 2014 - Car has bouncy and unstable ride - Scottsdale, AZ
Very knowledgeable

Scott

30 years of experience
950 reviews
Scott
30 years of experience
A8 Quattro 2014 - Car is making a noise - Scottsdale, AZ
Great mechanic.

Ronald

40 years of experience
118 reviews
Ronald
40 years of experience
A8 Quattro 2007 - Fuel Pump - Houston, TX
VERY PROFESSIONAL. 11/10 WOULD RECOMMEND :)

Ronald

40 years of experience
118 reviews
Ronald
40 years of experience
A8 Quattro 2007 - Vacuum Pump - Houston, TX
VERY PROFESSIONAL. 11/10 WOULD RECOMMEND :)

Excellent Rating

(93)

Rating Summary
87
1
1
0
4
87
1
1
0
4
Number of Audi A8 Quattro services completed
1023+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

10 Best Stores to Buy Auto Parts in Dallas, Texas
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Dallas is AutoZone.
How Long Does an Emergency Brake Control Last?
No No matter what vehicle you drive, it is equipped with an emergency parking brake. While some people use this each and every day, others never end up using it. It is meant to stop your car from rolling if...
5 Signs Your Car Isn't Shifting Correctly
Improper shifting is a sign of car transmission problems. The solution might be simple or complex, but get it inspected to avoid expensive repairs.

Thermostat stuck

A stuck closed thermostat will cause a reduction of coolant getting into the radiator so heat can be transferred out of the cooling system. The thermostat will need to be replaced (https://www.yourmechanic.com/services/thermostat-replacement) if it is indeed stuck closed and the...

Rattling sound while accelerating - 2007 Nissan Maxima

Hello. Most of the time, when you get this noise with this car accompanied with a loss of power, it is because the catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) is failing, or the timing chain (https://www.yourmechanic.com/services/timing-chain-replacement) may be ready to fail. Both of...

Blower motor works on low speed only. only replace blower motor resistor.

It sounds like this may be a sign of a faulty blower motor or bad wiring between the motor and the resistor. As you might know, these have electric motors in them that wear out over time and will begin...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com