Audi A7 Quattro Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(47)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(47)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Audi A7 Quattro Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Audi A7 QuattroV6-3.0L TurboService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Audi A7 QuattroV6-3.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Audi A7 QuattroV6-3.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2015 Audi A7 QuattroV6-3.0L Turbo DieselService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2013 Audi A7 QuattroV6-3.0L TurboService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2016 Audi A7 QuattroV6-3.0L Turbo DieselService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Audi A7 Quattro Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(47)

Rating Summary
45
2
0
0
0
45
2
0
0
0

Charles

34 years of experience
342 reviews
Charles
34 years of experience
Audi A7 Quattro V6-3.0L Turbo - Brake Pads Replacement (Rear) - Austin, Texas
Charles always does a great job!

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Audi A7 Quattro V6-3.0L Turbo - Oil Change - Los Angeles, California
WAY MORE COMPETENT THAN MY LAST MECHANIC. was super helpful, and was knowledgeable. Will definitely use him again.

James

31 years of experience
699 reviews
James
31 years of experience
Audi A7 Quattro V6-3.0L Turbo - Brake Pads Replacement (Rear) - Orange, California
Was told by the dealer I would need new rotors. Jim diagnosed them and said they were fine. Cut my cost in 1/2.

Benji

22 years of experience
277 reviews
Benji
22 years of experience
Audi A7 Quattro V6-3.0L Turbo - Brake Pads Replacement (Rear) - Scottsdale, Arizona
Excellent communication, very knowledgeable, ontime and courteous. Highly recommend.

Excellent Rating

(47)

Rating Summary
45
2
0
0
0
45
2
0
0
0
Number of Audi A7 Quattro services completed
517+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

P0151 OBD-II Trouble Code: O2 Sensor Circuit Low Voltage (Bank 2 Sensor 1)
P0151 code definition O2 Sensor Circuit Low Voltage (Bank 2 Sensor 1) What the P0151 code means P0151 is the OBD-II generic...
P0989 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch E Circuit Low
P0989 means there is an issue with the E circuit in the transmission fluid pressure sensor, likely due to a bad sensor, solenoid, or fluid level.
P2A00 OBD-II Trouble Code: O2 Sensor Circuit Range/Performance Bank 1 Sensor 1
P2A00 means there is an abnormal voltage reading from the O2 sensor, possibly due to a defective sensor, malfunctioning circuit, or leak.

steering vibrates after installing tire sealant

The tire sealant in the front tires are causing the tires to be out of balance and the only fix is to get the fluid out of the tires and have the tires cleaned out then the hole patched. Then...

ASR light on dashboard and car runs slow - 1992 Mercedes Benz 500 SEL

You may want to get a second opinion before replacing the entire harness. You could start by first checking and cleaning the mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) of any dirt and oils. The sensor will cause the loss of power...

If I turn the air ride off while it is inflated, will it stay inflated?

Hello. For most vehicles, the air suspension should stay inflated once the compressor is powered off or deactivated. In some cases, the release valve is also powered off when the compressor is powered off, allowing the system to stay inflated...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com