Audi A5 Sportback Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(12)

Control Arm Assembly Replacement Estimate for Audi A5 Sportback

Audi A5 Sportback Control Arm Assembly Replacement costs $602 on average.

CarServiceEstimateShop/Dealer Price
2018 Audi A5 SportbackL4-2.0L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1048.99Shop/Dealer Price$1301.04 - $2019.39
2018 Audi A5 SportbackL4-2.0L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1036.99Shop/Dealer Price$1287.14 - $2004.07
2018 Audi A5 SportbackL4-2.0L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1124.98Shop/Dealer Price$1388.79 - $2115.96
2018 Audi A5 SportbackL4-2.0L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1036.99Shop/Dealer Price$1287.11 - $2004.02
2018 Audi A5 SportbackL4-2.0L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$1124.98Shop/Dealer Price$1388.82 - $2116.02
2018 Audi A5 SportbackL4-2.0L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1036.99Shop/Dealer Price$1287.14 - $2004.06
2018 Audi A5 SportbackL4-2.0L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1042.99Shop/Dealer Price$1292.98 - $2009.78
2018 Audi A5 SportbackL4-2.0L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1042.99Shop/Dealer Price$1293.42 - $2010.56
Show example Audi A5 Sportback Control Arm Assembly Replacement prices

Control Arm Assembly Replacement Service

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Charles

4 years of experience
102 reviews
Charles
4 years of experience
Audi A5 Sportback L4-2.0L Turbo - Battery - Hendersonville, Tennessee
Charles did an outstanding job. He did the change out in my battery, was very respectful of my vehicle, very neat and very personable. Well done. Great experience!!!

Scott

36 years of experience
854 reviews
Scott
36 years of experience
Audi A8 Quattro V6-3.0L Turbo - Control Arm Assembly Replacement (Front Upper Left) - Scottsdale, Arizona
Would recommend to anyone.

Steve

15 years of experience
27 reviews
Steve
15 years of experience
Audi A4 V6-3.0L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Austin, Texas
Steve is TOP NOTCH, seriously. He does great work quickly, shows you what's going on with the car, and makes sure that you're getting a fair deal. I highly recommend Steve for any auto-servicing you need. I'll never go back to a standard shop again.

Jimmi

27 years of experience
198 reviews
Jimmi
27 years of experience
Audi A7 Quattro V6-3.0L Turbo - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Winter Garden, Florida
Personable, professional, prompt and competent.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Audi Control Arm Assembly Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Understanding Fuel Cell Cars
Future cars may run on fuel cells. Fuel cell cars produce only heat and water as emissions and have a longer range than other electric cars.
P0427 OBD-II Trouble Code: Catalyst Temperature Sensor Low (Bank 1)
Trouble code P0427 means the PCM detects that the catalyst temperature sensor reads a lower temperature than the normal range in engine bank 1.
How to Replace an Exhaust Gas Recirculation (EGR) Valve
The exhaust gas recirculation (EGR) valve can cause drivability problems if it fails and should be replaced to avoid engine performance issues.

Cost to replace full wiring for positive battey termical 2012 Mitsu Eclipse

The cable will need to be priced and acquired from the dealer for correct part and the labor calls for 2.0 hours to replace it. This does not include any testing or additional parts replaced with the cable that may...

Check engine light

Hi There, The check engine light may come on for many different reasons and is likely on as a result of the high idle. A high idle is generally the result of a lean fuel condition or a vacuum leak....

I have a 2006/7 Toyota Camry and it has a Japanese Multi-information display. Is there a way to get it to be changed to English?

Yes, you can change the language by following the same steps in the display menu when choosing languages. You may be able to find a step-by-step guide in your owners manual. The menu items usually come up in the same...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com