Audi A4 allroad Automatic Shutdown Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,399)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,399)

Automatic Shutdown Relay Replacement Service

How much does a Automatic Shutdown Relay Replacement cost?

On average, the cost for a Audi A4 allroad Automatic Shutdown Relay Replacement is $114 with $19 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Audi A4 allroadL4-2.0L TurboService typeAutomatic Shutdown Relay ReplacementEstimate$153.15Shop/Dealer Price$180.19 - $221.94
2017 Audi A4 allroadL4-2.0L TurboService typeAutomatic Shutdown Relay ReplacementEstimate$133.15Shop/Dealer Price$152.71 - $188.84
2016 Audi A4 allroadL4-2.0L TurboService typeAutomatic Shutdown Relay ReplacementEstimate$133.15Shop/Dealer Price$152.71 - $188.84
2014 Audi A4 allroadL4-2.0L TurboService typeAutomatic Shutdown Relay ReplacementEstimate$133.15Shop/Dealer Price$160.18 - $201.92
2013 Audi A4 allroadL4-2.0L TurboService typeAutomatic Shutdown Relay ReplacementEstimate$133.15Shop/Dealer Price$160.25 - $202.04
Show example Audi A4 allroad Automatic Shutdown Relay Replacement prices

What is the Automatic Shutdown Relay all about?

When you turn the key for your ignition to start, many different things happen. The fuel pump turns on, sending gas from the tank, through the lines, to the injectors. The battery sends voltage to the ignition system, which creates a spark, igniting fuel vapor and starting your engine. However, if the automatic shutdown relay (ASD) is not working, none of this will happen.

The automatic shutdown relay controls the power that is supplied to the ignition, the fuel pump, and the injectors, as well as other components. It is only activated for a few seconds during cranking, and is then turned off. Depending on the make and model in question, the automatic shutdown relay could be located under the hood, under the dash, or in another position.

As with any other electrical component, your automatic shutdown relay is subject to wear and tear, and frequent stopping and starting of the engine will exacerbate that wear. Eventually, it will fail and you’ll be left with a vehicle that doesn’t crank.

Keep in mind:

  • The ASD relay is not inspected during normal maintenance, and will only be checked during diagnostics for problems with the vehicle not cranking.
  • Many other problems can cause your engine not to crank, so professional diagnosis is necessary.
  • ASD failure is relatively rare, but it does happen.

How it's done:

  • The automatic shutdown relay is verified to see if it needs to be replaced
  • The defective automatic shutdown relay is removed
  • The new automatic shutdown relay is installed
  • The automatic shutdown relay is tested for operation
  • The vehicle is tested to ensure proper operation of the automatic shutdown relay

Our recommendation:

Your automatic shutdown relay provides power for some of the most important systems on your vehicle during ignition. If it fails, your engine will not crank, and it cannot be jumpstarted. If you are experiencing a no start condition, it may be the ASD relay, but it could be another problem. Seek immediate professional diagnosis and replacement by one of our expert mechanics.

What common symptoms indicate you may need to replace the Automatic Shutdown Relay?

  • Engine will not start
  • Check Engine light is on
  • Engine starts but stalls and dies

How important is this service?

Without an operational automatic shutdown relay, your engine will not start, which means your vehicle is not able to move. However, there are many other problems that can create the same symptom, ranging from a dead battery to a damaged battery, or a damaged cable to a failed main relay. If your automatic shutdown relay has failed, you will have to replace it before your vehicle will operate again.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,399)

Rating Summary
2,226
85
19
12
57
2,226
85
19
12
57

Daniel

11 years of experience
228 reviews
Daniel
11 years of experience
Audi A4 Quattro L4-1.8L Turbo - Oil/Fluid Leak - Niles, Illinois
Very helpful

Henry

34 years of experience
171 reviews
Henry
34 years of experience
Audi A4 Quattro V6-2.8L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right, Front Lower Left, Front Lower Right) - Sicklerville, New Jersey
Another great experience with Henry. Job well done. Highly recommend his services!

Kyle

12 years of experience
137 reviews
Kyle
12 years of experience
Audi A5 Quattro L4-2.0L Turbo - Oxygen Sensor Replacement (Front/Upper/Upstream) - Willingboro, New Jersey
Kyle was courteous,professional and knowledgeable. I will request him again

James

31 years of experience
694 reviews
James
31 years of experience
Audi TT Quattro L4-1.8L Turbo - Car is not starting - Brea, California
James had to reschedule for later in the day, but called with plenty of notice. He was polite and professional. It is clear that he knows what he's doing even if he doesn't have that much experience with my particular brand/model. His time and diagnosis were well worth the price of the service. I'm glad I chose it and glad that he came.

Excellent Rating

(2,399)

Rating Summary
2,226
85
19
12
57
2,226
85
19
12
57
Number of Audi services completed
26389+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

P0037 OBD-II Trouble Code: HO2S Heater Control Circuit Low (Bank 1, Sensor 2)
P0037 trouble code definition P0037 is the code for HO2S Heater Control Circuit Low (Bank 1, Sensor 2) What the P0037 code...
Colorado Parking Laws
Colorado Colorado parking laws: understanding the basics Many drivers in Colorado are well aware of the regulations and laws when they are out driving on the roads. However, they may not be quite as familiar with the laws regarding parking....
How to Measure Camber
Camber Camber (https://www.yourmechanic.com/article/what-is-tire-camber) is the angle between the vertical axis of the wheel and the axis of the wheels as seen from the front. If the wheel leans outward at the top, camber is positive. If the wheel leans outward...

Brake pedal has no resistance

This is a very dangerous situation as the braking system is one of the most important safety features of a vehicle. Have a brake inspection (https://www.yourmechanic.com/services/brake-safety-inspection-inspection) carried out by a qualified technician such as the ones here at YourMechanic to...

Starting, only clicks

The first to do is to make sure the engine turns by putting a socket and breaker bar on the crankshaft pulley bolt and turning the motor. If the motor turns, then you know it is in the wiring. Follow...

Thumps and grinding noises in differential

It is possible that you could have a faulty wheel bearing (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-wheel-bearings). Wheel bearings can often cause grinding noises when the lubrication onside them dries up. I would recommend having your vehicle inspected once more for a rear wheel bearing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com