Audi 80 Quattro Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,467)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,467)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Audi 80 Quattro Brake Vacuum Pump Replacement is $515 with $410 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Audi 80 QuattroL5-2.3LService typeBrake Vacuum Pump ReplacementEstimate$945.33Shop/Dealer Price$1165.12 - $1791.40
1992 Audi 80 QuattroL5-2.3LService typeBrake Vacuum Pump ReplacementEstimate$925.33Shop/Dealer Price$1145.15 - $1771.45
1988 Audi 80 QuattroL5-2.3LService typeBrake Vacuum Pump ReplacementEstimate$925.33Shop/Dealer Price$1145.15 - $1771.45
1989 Audi 80 QuattroL5-2.3LService typeBrake Vacuum Pump ReplacementEstimate$925.33Shop/Dealer Price$1145.11 - $1771.38
1991 Audi 80 QuattroL5-2.3LService typeBrake Vacuum Pump ReplacementEstimate$925.33Shop/Dealer Price$1145.17 - $1771.50
Show example Audi 80 Quattro Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,467)

Rating Summary
2,288
87
19
12
61
2,288
87
19
12
61

Angel

28 years of experience
118 reviews
Angel
28 years of experience
Audi A4 Quattro L4-2.0L Turbo - Brake Vacuum Pump - New River, Arizona
Performed job as expected, knowledgeable.

Tim

30 years of experience
45 reviews
Tim
30 years of experience
Audi A6 V6-3.2L - AC Pressure Switch - Marietta, Georgia
Great service

Jay

23 years of experience
184 reviews
Jay
23 years of experience
Audi A6 Quattro V6-3.2L - Fuel Pump - Mount Prospect, Illinois
Thanks for your time and help.

Hector

14 years of experience
60 reviews
Hector
14 years of experience
Audi A4 Quattro L4-2.0L Turbo - Pre-purchase Car Inspection - Denver, Colorado
Hector knows his way around vehicles and I felt very confident in his assessment.

Excellent Rating

(2,467)

Rating Summary
2,288
87
19
12
61
2,288
87
19
12
61
Number of Audi services completed
27137+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Heater Control Valve
Common signs include the heater not working, coolant leaking from under the engine, and no voltage across the heater control valve.
Symptoms of a Bad or Failing Throttle Controller
Common signs include intermittent throttle control, throttle hesitation or problems hesitating, and drastic changes in fuel economy.
Child Seat Safety Laws in Washington
Car Car crashes are the main cause of death for children up to the age of 12 all across the country, and many of those deaths can be attributed to improper use (or no use) of restraint systems. Washington State...

Steering wheel vibration over 60 mph

Hello. This vehicle should not shake like this when driving at high speeds. If it only occurs at higher rates of speed then it either has a warped front hub assembly or it may have a problem with the alignment....

What's wrong with my gas pedal?

Hello. This may be related to what is called a throttle position sensor. This is a small sensor inside the intake system of your car that monitors the position of your foot on the gas pedal and relays this information...

Grinding sound when I reverse and turn the wheel to the right

Hey there, this may be caused by a worn out or failing CV joint (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement) or potentially a brake pad (https://www.yourmechanic.com/services/brake-pads-replacement) with a rock or some kind of debris stuck in it. As you may know, a CV joint allows...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com