Audi 200 Quattro Brake Light Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,385)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,385)

Brake Light Switch Replacement Service

How much does a Brake Light Switch Replacement cost?

On average, the cost for a Audi 200 Quattro Brake Light Switch Replacement is $129 with $34 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Audi 200 QuattroL5-2.2L TurboService typeBrake Light Switch ReplacementEstimate$183.97Shop/Dealer Price$218.72 - $283.58
1989 Audi 200 QuattroL5-2.2L TurboService typeBrake Light Switch ReplacementEstimate$163.97Shop/Dealer Price$198.75 - $263.63
1990 Audi 200 QuattroL5-2.2L TurboService typeBrake Light Switch ReplacementEstimate$163.97Shop/Dealer Price$198.75 - $263.63
Show example Audi 200 Quattro Brake Light Switch Replacement prices

What is the brake light switch and how does it work?

The brake light switch is a mechanical switch activated when you press the brake pedal. The switch has a plunger in it that contacts a lever in the brake pedal assembly. As that plunger is depressed when you push on the brake pedal, the contacts in the brake light switch closed and voltage flows to the brake lights — turning them on. The brake light switch is also in the circuit that controls the cruise control disengagement and the shift interlock safety feature installed on all newer cars. Failure of the brake light switch occurs due to wear on the internal electrical contacts in the switch, poor switch terminal connections, maladjustment of the switch, or damage to the brake pedal assembly.

When to consider replacing the brake light switch?

  • No brake lights. If depressing the brake pedal does not cause any of the brake lights to illuminate, the continuity of the switch will be tested. If only one brake light is out, then the issue is not the switch but rather the bulb, bulb socket or brake light circuit integrity.
  • Unable to shift out of park. The brake light switch is also wired into the shift interlock mechanism. If you are unable to shift out of park, with your foot on the brake, check to see if the brake lights will illuminate as you push the pedal. If they do not illuminate, failure of the brake light switch may be the cause of the no shift.
  • Intermittent operation of the brake lights or late operation. The brake light switch has to be in the proper position, and work consistently if the brake lights are to come on the instant you press the brake pedal. The switch can sometimes require adjustment, or the contacts may degrade, causing inconsistent operation of the switch.

How do mechanics replace the brake light switch?

  • The switch is first tested using a multimeter, including the terminal contacts to the switch, to determine if it is faulty. If the switch is functioning, the entire circuit must be tested to determine the cause of no brake lights.
  • Should the switch be judged defective, the switch is unthreaded from the mounting boss near the brake pedal assembly.
  • The new switch is threaded in and locked with an appropriate locknut once the new switch is properly adjusted.
  • The operation of the switch is tested to ensure instant illumination of the brake lights upon pressing the brake pedal.

Is it safe to drive with a brake light switch problem?

No. Should the brake light switch have failed, it is unsafe to drive the vehicle because drivers behind you will have no indication that you are slowing, intend to slow, or are stopped. Always address a failure of this type promptly to ensure your safety while driving.

When replacing the brake light switch keep in mind:

  • The mechanic will test the brake light switch directly to ensure that the issue is not elsewhere in the brake light circuit.
  • Occasionally, the issue is a maladjusted switch or a loose contact, and the mechanic can resolve the problem without switch replacement.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,385)

Rating Summary
2,214
84
19
12
56
2,214
84
19
12
56

Bill

32 years of experience
52 reviews
Bill
32 years of experience
Audi Q7 V8-4.2L - Brake Light Switch - Littleton, Colorado
Great work Very knowledgeable thanks for sending him out. Will call him again soon.

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Audi Q7 V6-3.0L Turbo Diesel - Brake Light Switch - Cypress, Texas
A1 mechanic!

Charles

17 years of experience
176 reviews
Charles
17 years of experience
Audi A6 Quattro V6-2.7L Turbo - Brake Light Switch - Washington, District of Columbia
He was great and he do great work

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Audi A4 Quattro V6-2.8L - Drive Belt Tensioner - Oakland, California
I've used Josh for three different services on two different vehicles. Again I had a stellar experience with him. He comes on time, is well prepared, and always ensures there are no other issues that need to be addressed. Very happy with his service.

Excellent Rating

(2,385)

Rating Summary
2,214
84
19
12
56
2,214
84
19
12
56
Number of Audi services completed
26235+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Ford Fusion Hybrid
The The 2012 Ford Fusion Hybrid is a really great choice for anyone looking for a mid-size sedan. Not only does it boast plenty of room for people and cargo, but it also has a good amount of power and...
Rules of the Road For Ohio Drivers
When When it comes to driving, if you have a valid driver’s license, you likely know the traffic laws you are required to follow in the state in which it was issued. While that same knowledge will help with the...
How to Get Smog Technician Certified in Massachusetts
Automotive technician jobs include smog certified emissions inspectors. In Massachusetts, you must be hired and trained by Parsons to become one.

Gas pedal not going down when pressed.

The throttle pedal may be blocked by your carpet. Check the pedal to make sure it is not being blocked. The pedal operates a cable and then to the throttle body assembly. Each of these would need to be checked...

Driving down the road in 2013 Nissan altima coupe and the vehicle stopped pulling on its own.

Hi there. If you have replace the sensor and the codes are coming back on, the there could be an issue with the shift solenoids inside the transmission. The code P0500 (https://www.yourmechanic.com/article/p0500-obd-ii-trouble-code-vehicle-speed-sensor-malfunction-by-spencer-clayton) is coming up for the output shaft speed...

Where is steering angle sensor located in 2017 Toyota Camry

The steering angle sensor is at the top of the steering column. The yaw rate sensor will be mounted to the floor under front of console.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com