Audi 100 Quattro Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,694)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,694)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Audi 100 Quattro Power Steering Pressure Hose Replacement is $390 with $208 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Audi 100 QuattroL5-2.3LService typePower Steering Pressure Hose ReplacementEstimate$1373.74Shop/Dealer Price$1674.99 - $2560.31
1992 Audi 100 QuattroV6-2.8LService typePower Steering Pressure Hose ReplacementEstimate$723.20Shop/Dealer Price$834.09 - $1151.61
1991 Audi 100 QuattroL5-2.3LService typePower Steering Pressure Hose ReplacementEstimate$1362.03Shop/Dealer Price$1659.32 - $2541.67
1993 Audi 100 QuattroV6-2.8LService typePower Steering Pressure Hose ReplacementEstimate$723.20Shop/Dealer Price$834.18 - $1151.77
1994 Audi 100 QuattroV6-2.8LService typePower Steering Pressure Hose ReplacementEstimate$723.20Shop/Dealer Price$839.60 - $1161.24
Show example Audi 100 Quattro Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,694)

Rating Summary
2,506
93
20
13
62
2,506
93
20
13
62

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Audi A4 L4-1.8L Turbo - Power Steering Pressure Hose Replacement - San Marcos, California
great job

David

28 years of experience
182 reviews
David
28 years of experience
Audi A6 Quattro V6-3.2L - Power Steering Pressure Hose - San Mateo, California
Excellent customer service....he called to update me on his schedule and arrival time. Was flexible with my schedule and stayed well past the designated appt. time to finish the entire job.

Zachery

9 years of experience
14 reviews
Zachery
9 years of experience
Audi A4 Quattro L4-1.8L Turbo - Battery - Columbus, Ohio
Zachery was very freindly and courteous. He explained everything in detail and was a very good experience. Will definitely use this service again.

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Audi A8 Quattro V6-3.0L Turbo - Control Arm Assembly Replacement (Front Upper Left) - Scottsdale, Arizona
Would recommend to anyone.

Excellent Rating

(2,694)

Rating Summary
2,506
93
20
13
62
2,506
93
20
13
62
Number of Audi services completed
29634+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Drive a Car in Reverse Gear
Knowing how to drive in reverse is important for any motorist. It's necessary to do so when parallel parking or backing out of a parking lot.
How to Transfer a Car Title in Massachusetts
Without Without a title, there is no proof that you own the vehicle in question. The state of Massachusetts (and all other states in the country) require each vehicle to have a title in the name of the owner. When...
P2272 OBD-II Trouble Code: O2 Sensor Signal Stuck Lean Bank 2 Sensor 2
What What the P2272 code means? P2272 is an OBD-II generic code for the engine control module (ECM) detecting the O2 sensor for bank 2 sensor 2 after the catalytic convertor is stuck lean. What causes the P2272 code? The...

Replace a oil pump

Replacing an oil pump involves dropping down the front sub frame and then removing the oil pan. You will need to support the engine and transmission assembly. The important question here is: why are you replacing the pump? You need...

Will turn over but won't start - 1968 Chevrolet C10 Pickup

Hello. You need to see if you have power to one side of the coil and blinking power on the other side when you crank the engine. If you do and no spark comes out of the coil, then replace...

No heat on passenger side

Hello. Most of the time this is due to a failure in the blend door motor on the passenger side. It can also be the door itself or a sensor issue but most of the time it is the motor....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com