Acura RDX Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(184)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(184)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Acura RDX Power Steering Pump Replacement is $415 with $275 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Acura RDXL4-2.3L TurboService typePower Steering Pump ReplacementEstimate$704.86Shop/Dealer Price$848.63 - $1265.75
2010 Acura RDXL4-2.3L TurboService typePower Steering Pump ReplacementEstimate$695.85Shop/Dealer Price$836.52 - $1251.33
2009 Acura RDXL4-2.3L TurboService typePower Steering Pump ReplacementEstimate$695.85Shop/Dealer Price$836.57 - $1251.40
2008 Acura RDXL4-2.3L TurboService typePower Steering Pump ReplacementEstimate$695.85Shop/Dealer Price$836.57 - $1251.40
2012 Acura RDXL4-2.3L TurboService typePower Steering Pump ReplacementEstimate$695.85Shop/Dealer Price$839.14 - $1255.91
2011 Acura RDXL4-2.3L TurboService typePower Steering Pump ReplacementEstimate$695.85Shop/Dealer Price$836.81 - $1251.83
Show example Acura RDX Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(184)

Rating Summary
177
4
2
1
0
177
4
2
1
0

Ronald

40 years of experience
118 reviews
Ronald
40 years of experience
RDX 2015 - Timing Belt - Cypress, TX
Ronald was excellent. He did a great job, it was very easy to work with him, he answered all my questions, and he even finished early!!

Leo

31 years of experience
12 reviews
Leo
31 years of experience
RDX 2018 - Oil Change - Langhorne, PA
Leo was fantastic! On time and great service!

Alfred

0 years of experience
530 reviews
Alfred
0 years of experience
RDX 2009 - Cooling System Flush - San Francisco, CA
I have worked with Alfred for more than 1.5 years. He has been professional, kind, and I really appreciate his honest and integrity of his work. He answers my questions thoroughly and honestly with unbiased recommendations on necessary maintenance to save cost. I look forward to working with Alfred again.

Alfred

0 years of experience
530 reviews
Alfred
0 years of experience
RDX 2018 - Transmission Fluid Service - San Francisco, CA
Showed up early, finished early.

Excellent Rating

(184)

Rating Summary
177
4
2
1
0
177
4
2
1
0
Number of Acura RDX services completed
2024+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

P0619 OBD-II Trouble Code: Alternative Fuel Control Module RAM/ROM Error
P0619 means a problem in the alternative fuel control module RAM/ROM, caused by its malfunction or faulty wiring within the CAN Bus harness.
P0345 OBD-II Trouble Code: Camshaft Position Sensor A Circuit Malfunction (Bank 2)
Trouble code P0345 means the computer has detected an incorrect voltage reading from the bank 2 camshaft position sensor.
The Best Tool For Car Mechanics to Check Evaporative Emissions Leaks
Automotive technician jobs require tools for checking evaporative emissions leaks. Mac Tools has a handy diagnostic and testing smoke machine kit.

My dome light doesn't work - how can I diagnose/replace?

Hello, thank you for asking about your 2005 Nissan Altima. The body control module controls turning on the lights and supplies power to the lights' power saver mode. The body control module would need to be scanned and seek data...

Engine surges when stopped in traffic, high RPMs

Hi there. I do not have any information on this problem of the engine accelerating on its own. If the dealer has not duplicated the issue, then leave it for and extended test drive or duplicate it for them with...

My inside lights won't come on.

Hello. The dome light is triggered by a switch in your door or the manual switch on the dashboard or on the fixture itself. Due the fuse being checked and testing good, you are going to need to test for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com