Volvo XC60 Brake pressure is uneven Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(79)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(79)

Brake pressure is uneven Inspection Service

How much does a Brake pressure is uneven Inspection cost?

On average, the cost for a Volvo XC60 Brake pressure is uneven Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Volvo XC60L4-2.0L Turbo HybridService typeBrake pressure is uneven InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2015 Volvo XC60L4-2.0L TurboService typeBrake pressure is uneven InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2013 Volvo XC60L6-3.2LService typeBrake pressure is uneven InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Volvo XC60L6-3.2LService typeBrake pressure is uneven InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2012 Volvo XC60L6-3.0L TurboService typeBrake pressure is uneven InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2016 Volvo XC60L5-2.5L TurboService typeBrake pressure is uneven InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Volvo XC60L5-2.5L TurboService typeBrake pressure is uneven InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2018 Volvo XC60L4-2.0L TurboService typeBrake pressure is uneven InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Volvo XC60 Brake pressure is uneven Inspection prices

We tend to take our brakes for granted until something goes wrong. During normal operations, you’ll press the brake pedal and the car will slow down. However, there may be times when pressing the brake pedal also results in a pull to one side or the other – this is an example of uneven brake pressure. There are many potential causes here.

How this system works:

In a normally operating brake system, the calipers will squeeze the rotors evenly on both sides of the car (or on all four corners in the case that you have four-wheel disc brakes). Pressurized fluid is sent to each caliper from the master cylinder in even amounts, and the force applied by each caliper is nearly identical.

This allows the car to slow down evenly, without any changes in direction. It also ensures even pad wear. However, in some instances, this does not happen. There are several possible reasons for uneven brake pressure, and not all of them have to do with the braking system.

Common reasons for this to happen:

  • Stuck Caliper: Perhaps the most obvious reason for brake pressure to be uneven is a stuck caliper. If the caliper is not free to slide back and forth on the slide pins, it will not engage the pad correctly. In fact, it might never completely disengage from the pad, creating a constant drag that can be noticed even when the brakes are not being used.

  • *Damaged Brake Line - Sometimes, brake line damage isn’t visible. If the inner liner of the line has been damaged, it can act like a restrictor, blocking the flow of fluid to the caliper and reducing braking force.

  • Stuck Piston: The piston in the caliper needs to move back and forth freely, but if part of the seal has become wedged between the body of the piston and the caliper, it will not move as needed. This can also create uneven brake pressure.

  • Bad Proportioning Valve: The proportioning valve is located under the hood and is responsible for adjusting the fluid pressure sent to the rear brakes. If the valve begins to fail, uneven brake pressure can result.

  • Pad Contamination: Another possible cause of brake pull (uneven pressure) is if fluid has contaminated the brake pad. This can be brake fluid, grease or even oil.

  • Using Two Different Types of Pads: If you have replaced the pads on one side the car but not the other (which is always a no-no), there’s a chance you’re using two different types of pads. Different manufacturers use varying pad materials with very different performance characteristics.

  • Uneven Tire Pressure: Oddly enough, uneven tire pressure can masquerade as uneven brake pressure. Check your tires to ensure that they are properly inflated – this can be an inexpensive, hassle-free fix in some situations.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect your car’s entire brake system, including the brake lines, pads, rotors, calipers, pistons and more in order to identify the underlying problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the entire brake system in order to determine the underlying cause of uneven brake pressure. The mechanic may also need to test drive the car to verify pulling, and to test for other potential problems, including pedal pulsation.

How important is this service?

Uneven brake pressure can be a sign of a serious problem. A stuck caliper can cause serious damage to the pads and rotors, and your stopping ability is compromised, as well. A damaged brake line will eventually fail completely. Pad contamination may be a sign of a brake fluid leak, an oil leak, or possibly a damaged CV boot if grease is the contaminant. A stuck piston can also be a very serious problem that can cost a lot of money if not caught in time. Have your brake system professionally inspected and maintained during normal maintenance. One of our mechanics can inspect and repair your brakes if you experience uneven brake pressure.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(79)

Rating Summary
70
4
0
1
4
70
4
0
1
4

Edgar

10 years of experience
56 reviews
Edgar
10 years of experience
Volvo XC60 L6-3.2L - Oil Change - Austin, Texas
Edgar was helpful, prompt and did great work, even sharing a heads up about an issue that we wouldn't have caught otherwise. Would book again -

Joe

15 years of experience
453 reviews
Joe
15 years of experience
Volvo XC60 L6-3.2L - Headlight Bulb Replacement (Driver Side Low Beam, Passenger Side Low Beam) - Franklin, Tennessee
Joe arrived exactly on time, and immediately explained how the service call would work. He performed the work requested expeditiously and with 100% success. He allowed me to observe, and answered all questions cheerfully. He then performed a quick inspection of my vehicle and made recommendations for a future service within the next 7,000 miles. Plus...the price was right. The parts cost about what I could get myself, and the service call and labor were more than reasonable. All in all, great satisfaction with Joe and the service provided.

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
Volvo XC60 L6-3.2L - Thermostat - Redmond, Washington
Very knowledgeable. Was able to diagnose and repair immediately. Ask for him by name to save return trips for warranty work.

Tyrone

9 years of experience
154 reviews
Tyrone
9 years of experience
Volvo XC60 L6-3.2L - Car is not starting - Inglewood, California
Tyrone was extremely helpful and fixed everything incredibly fast

Excellent Rating

(79)

Rating Summary
70
4
0
1
4
70
4
0
1
4
Number of Volvo XC60 services completed
869+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

Signs of a Bad or Failing AC Compressor Relay
Common signs include inconsistent cooling, not hearing a click from the compressor turning on, and no cold air.
P0537 OBD-II Trouble Code: A/C Evaporator Temperature Sensor Circuit Low
P0537 means the evaporator core’s temperature dropped, lowering circuit resistance due to a faulty temperature sensor, expansion valve, or wiring.
How to Flush a Fuel Injector
Clean fuel injectors help keep your engine running smoothly and efficiently. Clogged fuel injectors result in reduced fuel economy and loss of power.

Car won't start, 2012 Kia Rio

Hi there, thanks for writing in about your 2012 Kia Rio. If you only hear clicking, then you should have the starter checked to see if it is getting power. Replace the starter if there is power when you try...

is it safe to keep driving my car with a blown ac compressor

Hi! It is most likely OK to operate your vehicle even thought the a/c compressor has failed. However there are a couple things to be aware of. As long as the compressor pulley is rotating smoothly, without wobble or noise,...

Engine idle fluctuates

You may have a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at idle. Since...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com