Volvo V90 Cross Country Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Volvo V90 Cross Country Control Arm Assembly Replacement is $423 with $283 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Volvo V90 Cross CountryL4-2.0L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$923.28Shop/Dealer Price$1073.26 - $1504.55
2017 Volvo V90 Cross CountryL4-2.0L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$712.77Shop/Dealer Price$856.30 - $1282.76
2018 Volvo V90 Cross CountryL4-2.0L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$902.56Shop/Dealer Price$1048.53 - $1476.82
2017 Volvo V90 Cross CountryL4-2.0L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$712.77Shop/Dealer Price$856.32 - $1282.80
2017 Volvo V90 Cross CountryL4-2.0L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$741.97Shop/Dealer Price$887.66 - $1315.74
2017 Volvo V90 Cross CountryL4-2.0L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$741.97Shop/Dealer Price$886.06 - $1312.94
2018 Volvo V90 Cross CountryL4-2.0L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$741.97Shop/Dealer Price$885.91 - $1312.68
2018 Volvo V90 Cross CountryL4-2.0L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$741.97Shop/Dealer Price$885.89 - $1312.65
Show example Volvo V90 Cross Country Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0

Ryan

9 years of experience
16 reviews
Ryan
9 years of experience
Volvo V90 Cross Country L4-2.0L Turbo - Oil Change - Philadelphia, Pennsylvania
I did an oil change with him. Ryan showed up even little earlier and was very thorough and detail-oriented. He did every step very carefully and even wiped off the area. I appreciate his professionalism.

Jason

18 years of experience
429 reviews
Jason
18 years of experience
Volvo S60 L5-2.4L Turbo - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Livermore, California
He's the best!

Paul

34 years of experience
134 reviews
Paul
34 years of experience
Volvo S80 L5-2.5L Turbo - Control Arm Assembly Replacement (Front Lower Right) - Garner, North Carolina
Paul is professional and he took care of the problem

Pierre

10 years of experience
366 reviews
Pierre
10 years of experience
Volvo XC70 L5-2.5L Turbo - Control Arm Assembly Replacement (Front Lower Left) - Brookline, Massachusetts
Excellent all around!

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0
Number of Volvo Control Arm Assembly Replacement services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

P0542 OBD-II Trouble Code: Intake Air Heater "A" Circuit High
P0542 trouble code means that there is an issue with the intake air heater “A” circuit high often due to faulty intake air relay or poor wiring
What are the Car Pool Rules in Oklahoma?
Car Car pool lanes were introduced to American road a few decades ago, and have been rising in popularity ever since. A large number of states have these lanes, and they cover more than 3,000 miles across the country. Many...
How to Top Off Car Coolant
Coolant, also known as anti-freeze, needs to be kept at a certain level to prevent car engines overheating and damaging the engine.

How do I remove the tonneau cover?

The tonneau cover can be removed to save space. To remove the tonneau, push one of the ends of the cover housing in, then pull the tonneau cover out of its position.

Engine shaking

Quite a few things can make an engine shake, especially at idle. Spark plugs and the ignition system, carbon build up in the combustion chambers, fuel injectors, vacuum leaks or engine mounts are all possible culprits. But one thing is...

Why do I have a p0016 trouble code?

The cause for a p0016 trouble code could be normally be tracked to one of two areas. The code is set when the computer does not see synchronized information being received from the cam and crank sensors. It will be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com