Volvo V60 Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(9)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(9)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a Volvo V60 Engine is sputtering Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Volvo V60L4-2.0L TurboService typeEngine is sputtering InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Volvo V60L4-2.0L TurboService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Volvo V60L6-3.0L TurboService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Volvo V60L4-2.0L Turbo HybridService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2016 Volvo V60L5-2.5L TurboService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2019 Volvo V60L4-2.0L TurboService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Volvo V60L4-2.0L Turbo HybridService typeEngine is sputtering InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2015 Volvo V60L5-2.5L TurboService typeEngine is sputtering InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Volvo V60 Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Brian

23 years of experience
661 reviews
Brian
23 years of experience
Volvo V60 L4-2.0L Turbo - Oil Change - Jacksonville, Florida
My experience was excellent. Easy, quick, competent. I will do this from now on

Ben

41 years of experience
1416 reviews
Ben
41 years of experience
Volvo V60 L4-2.0L Turbo - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Houston, Texas
Honestly, Ben brought some serious joy to my day! It has been at least 18 months since I last used YourMechanic, as I realized I can do practically everything myself (thank you Youtube), but as work has gotten more and more hectic, I find myself with substantially less time and ability to commit a few hours on the weekend (what is a weekend anymore haha) to fixing my car. Ben was 5 minutes early, and even reached out the day before to introduce himself, confirm I had the necessary parts, and make sure he brought the correct equipment to work on my Volvo. Volvo quotes me $900, Ben gets it done for $200. He had a smile on his face the whole time and is truly a genuine man. I have some heavy piece of mind knowing I took care of the vehicle that has treated me like a king for the last 3 years, and I owe it to Ben!!

Brian

23 years of experience
661 reviews
Brian
23 years of experience
Volvo V60 L4-2.0L Turbo - Tire Rotation - Jacksonville, Florida
prefect and soo easy

Michael

27 years of experience
95 reviews
Michael
27 years of experience
Volvo V60 L4-2.0L Turbo - Oil Change - Houston, Texas
Michael was early both times, a whole day early the second time so that was awesome!! Also was a huge plus that he came back to finish the job when he didn't necessarily have to so thanks so much Michael that the real deal!

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Volvo V60 services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Timing Belt
You You car’s timing belt is a big part of what makes your car run smoothly. This belt is responsible for controlling the camshafts that are in the engine. It closes and opens the valves at the exact right moment,...
P0083 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 1 Sensor 2)
P0083 P0083 code definition P0083 is a general OBD2 code indicating a issue with bank 2 intake valve control solenoid. This code may be seen with P0081 and P0082. The vehicle also has a bank 1 valve control solenoid. What...
P2789 OBD-II Trouble Code: Clutch Adaptive Learning at Limit
P2789 means that the clutch's learning system is not performing normally because the desired adaptive response exceeds the predetermined limit.

Car is vibrating and making a clicking noise; should I replace the CV joints?

If you are hearing a clicking noise, this may very well be related to the CV joints. Generally, when it gets to this point, the CV joint has already completely failed and will need to be replaced. In severe cases,...

I have a important question about my cars engine (n63tu)

Hi there: It really depends on what "power adders" you're planning on installing on your BMW to produce 800 HP to the wheels. However, just remember this simple reality - the OEM internal components are not designed to handle more...

vdc and service engine soon lights on

The VDC (Vehicle Dynamic Control) is part of the vehicles traction control system. The traction control system (https://www.yourmechanic.com/services/traction-control-light-is-on-inspection) monitors the steering and stability of the vehicle and engages when loss of traction has been detected. This is done by the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com