Volvo S60 Cross Country Windshield Wiper/Washer System Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1,469)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1,469)

Windshield Wiper/Washer System Inspection Service

How much does a Windshield Wiper/Washer System Inspection cost?

On average, the cost for a Volvo S60 Cross Country Windshield Wiper/Washer System Inspection is $133 with $38 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Volvo S60 Cross CountryL4-2.0L TurboService typeWindshield Wiper/Washer System InspectionEstimate$190.75Shop/Dealer Price$219.69 - $284.01
2017 Volvo S60 Cross CountryL4-2.0L TurboService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.71 - $264.04
2016 Volvo S60 Cross CountryL5-2.5L TurboService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.71 - $264.04
Show example Volvo S60 Cross Country Windshield Wiper/Washer System Inspection prices

The windshield wiper and washer system help keep a windshield clean and free of rain, dirt, sleet or snow. This system is not only a convenience but a safety system as well. Limited visibility due to a dirty windshield can make safe driving difficult or impossible.

There are a number of components in the wiper/washer system that can malfunction and cause problems. Everything from a blown fuse to a bad pump can leave a windshield dirty.

How this system works:

Windshield wipers use two different technologies to keep the windshield clean. An electric motor using a worm gear provides the power to move the wipers while a linkage converts the rotational output of the electric motor into the familiar back and forth motion of the wiper blades.

The windshield washer system uses a washer pump that is installed at the base of the washer fluid reservoir. The pump is activated by a spring-loaded switch, this switch turns on the wipers as well. The fluid is pumped through a rubber or plastic hose that runs up to windshield and separates in two lines that feed the washer nozzles on the hood of the car.

Common reasons for this to happen:

Windshield Wiper Issues

  • Worn wiper blades: Wiper blades need to be replaced on a regular basis. Worn wiper blades will not clean the windshield. Smearing or streaking are common symptoms of worn blades. If the blades chatter this can also indicate dirty or worn blades. Torn or cracking blades need to be replaced.

  • Bent or loose wiper arms: Wiper arms can become bent, usually due to vandalism. If the wiper blades are not cleaning the windshield but still appear to be in good shape loose or bent wiper arms could be the problem.

  • Malfunctioning wiper arm linkage: The linkage between the wiper motor and the blades can become damaged. The most common symptom of a broken linkage is one wiper arm not working.

  • Blown fuse: A blown fuse will cut off the electric current to the wiper motor. If both blades fail to function when turned on, a blown fuse is usually the starting point for a diagnosis.

  • Bad wiper motor: If the blades fail to operate at all, are operating slowly, only operate on one speed or do not stop in the correct position a bad or malfunctioning wiper motor could be the culprit. The motor will need to be repaired or replaced.

  • Defective wiper switch: If the wipers do not turn on when the switch is flipped, keep running after being switched off or it is impossible to select the proper speed settings the switch may be defective and will have to be replaced.

Windshield Washer Issues

  • No washer fluid: One of the most common reasons windshield washers fail to work is because the fluid reservoir is empty.

  • Blown fuse: Fuses provide overcurrent protection to all of the vehicle’s electrical units and this includes the windshield washer system. If a fuse blows, the electrical current to the washer pump will be cut off and the washer system will not work.

  • Bad windshield washer switch: The switch that turns on the windshield washer can malfunction and fail to send a signal to the pump. If this happens the pump will not work.

  • Broken washer pump: The electric pump that sends the fluid from the reservoir to the nozzles can malfunction or break.

  • Leaky washer tubes or bottle: The washer reservoir or the tubing that moves the fluid to the nozzles can crack or leak. This can lead to lost fluid on route to the nozzles, which can result in a weak spray or no spray at all.

  • Clogged washer tubes or nozzles: The tubing or the nozzles themselves can become clogged with debris. The nozzles, which are quite small can easily get clogged by dirt, leaves or other debris.

  • Frozen washer fluid: In extremely cold weather it is possible for washer fluid to freeze. If the fluid is frozen it should thaw as the car warms up.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the windshield wiper or washer system issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning windshield wiper or washer system is usually not a life or death situation but it should be addressed as soon as it is convenient. This can become a very real problem if the weather suddenly turns bad as limited visibility can make driving extremely dangerous.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(1,469)

Rating Summary
1,380
47
10
5
27
1,380
47
10
5
27

Khoa

20 years of experience
402 reviews
Khoa
20 years of experience
Volvo XC90 V8-4.4L - Door Lock Actuator Replacement (Passenger Side Rear) - Mountain View, California
Great work done efficiently

Lee

34 years of experience
66 reviews
Lee
34 years of experience
Volvo XC90 L5-2.5L Turbo - Electrical components are not working - Smyrna, Georgia
Lee was on time, and very professional. I wouldn't hesitate to book him again.

Frank

40 years of experience
57 reviews
Frank
40 years of experience
Volvo S40 L5-2.4L - Car is not starting - Suwanee, Georgia
I would highly recommend Frank to anyone looking for a great mechanic. He was on time and very informative. Will be a returning customer.

Khoa

20 years of experience
402 reviews
Khoa
20 years of experience
Volvo XC90 L6-2.9L Turbo - Battery - Mountain View, California
Brilliant, frank, and reliable. Goes above and beyond.

Excellent Rating

(1,469)

Rating Summary
1,380
47
10
5
27
1,380
47
10
5
27
Number of Volvo services completed
16159+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How Long Does a Headlamp Dimmer Switch Last?
Most Most drivers neglect to realize just how many systems have to work together to make driving at night possible. Among the most important things that you will have to possess when trying to drive at night is a set...
P0247 OBD-II Trouble Code: Turbocharger Wastegate Solenoid B Malfunction
P0247 P0247 code definition The P0247 code indicates that there is a turbocharger wastegate solenoid B malfunction. What the P0247 code means When the P0247 code appears on your vehicle, it means that the powertrain control module has found readings...
P0736 OBD-II Trouble Code: Reverse Incorrect Gear Ratio
P0736 code means the PCM has detected an abnormality in the ratio of a particular gear often due too a faulty shift solenoid or dirty fluids.

How do I select a radio band?

Your vehicle has three radio bands: AM, FM1, and FM2. To select the radio band, press the AM/FM button until the correct band is displayed.

Crank bit won't turn over

This suggests you may have a fuel supply issue if you have confirmed that you do have spark. Try pulling one of the spark plugs out after cranking it to see if it is wet with fuel. If it is...

Cylinder 6 doesn't work on my Ford Explorer

Hi. A cylinder not working can be caused by several things. Two reasons that are common are an injector (https://www.yourmechanic.com/services/fuel-injector-replacement) or an ignition coil failing (https://www.yourmechanic.com/services/ignition-coil-replacement). I recommend examining the coil, the injector cable and the number cylinder six to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com