Volvo C70 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(70)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(70)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Volvo C70 Fuel Injector Replacement is $355 with $231 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Volvo C70L5-2.4L TurboService typeFuel Injector ReplacementEstimate$2190.67Shop/Dealer Price$2713.96 - $4254.60
2003 Volvo C70L5-2.3L TurboService typeFuel Injector ReplacementEstimate$2127.81Shop/Dealer Price$2641.91 - $4154.92
2012 Volvo C70L5-2.5L TurboService typeFuel Injector ReplacementEstimate$652.50Shop/Dealer Price$788.17 - $1150.08
2004 Volvo C70L5-2.3L TurboService typeFuel Injector ReplacementEstimate$2135.81Shop/Dealer Price$2651.88 - $4170.87
1998 Volvo C70L5-2.3L TurboService typeFuel Injector ReplacementEstimate$2429.17Shop/Dealer Price$3018.63 - $4757.67
2001 Volvo C70L5-2.4L TurboService typeFuel Injector ReplacementEstimate$2798.31Shop/Dealer Price$3480.03 - $5495.92
1999 Volvo C70L5-2.3L TurboService typeFuel Injector ReplacementEstimate$2142.31Shop/Dealer Price$2658.23 - $4177.11
2002 Volvo C70L5-2.4L TurboService typeFuel Injector ReplacementEstimate$2804.81Shop/Dealer Price$3486.84 - $5502.96
Show example Volvo C70 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(70)

Rating Summary
69
1
0
0
0
69
1
0
0
0

Nicholas

11 years of experience
585 reviews
Nicholas
11 years of experience
Volvo C70 L5-2.5L Turbo - Vacuum Pump - Cary, North Carolina
Nick was professional and knowledgeable he is an outstanding mechanic.

Raymond

27 years of experience
223 reviews
Raymond
27 years of experience
Volvo C70 L5-2.3L Turbo - Serpentine/Drive Belt - Victorville, California
AC isn't working......Blowing hot air!

Carlton

39 years of experience
14 reviews
Carlton
39 years of experience
Volvo C70 L5-2.5L Turbo - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Arlington, Virginia
Carlton was early, solved the problems and completed the repairs in a professional manner. Great job.

Jerome

24 years of experience
415 reviews
Jerome
24 years of experience
Volvo C70 L5-2.5L Turbo - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Baltimore, Maryland
He did excellent job

Excellent Rating

(70)

Rating Summary
69
1
0
0
0
69
1
0
0
0
Number of Volvo C70 services completed
770+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Crankshaft Harmonic Balancer
It It sounds musical, but what it really does is disperse vibrations that travel through the crankshaft to prevent damage to it and other vehicle components. The harmonic balancer, or vibration damper, is made up of two masses that vary...
P0029 OBD-II Trouble Code: Exhaust Valve Control Solenoid Circuit Range/Performance (Bank 2)
P0029 P0029 trouble code definition Exhaust Valve Control Solenoid Circuit Range/Performance (Bank 2) What the P0029 code means P0029 is the OBD-II generic code indicating the engine control module (ECM) has determined that the variable valve lift solenoid for the...
How to Buy a Personalized License Plate in New Hampshire
A A personalized license plate (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer) is a great way to add unique personalization to your vehicle. With a personalized plate, you can make your car a little more fun or a little more special. You can create a special...

Car leaking coolant after repair

Hello. If this was fixed recently then you really should take it back to the shop that did the repair. It may be a loose hose or clamp, or it may be something entirely different. I typically locate and fix...

Barometric Pressure Sensor Error Code

The next step would be to do a proper full pinpoint test indication in the troubleshooting charts for the code that you got. This test will check the wiring, connections, ECM connections and the ECM itself. If you do not...

My warning sign is on and I don't know why

Hello. Thank you for writing in. The issue with the vehicle can easily be diagnosed with a vehicle diagnostic scan. To describe this further lets start with the warning light. When the car is turned to the "On" position, the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com