Volvo 960 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Volvo 960 Mass Airflow Sensor Replacement is $269 with $174 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Volvo 960L6-2.9LService typeMass Airflow Sensor ReplacementEstimate$780.59Shop/Dealer Price$956.99 - $1463.69
1992 Volvo 960L6-2.9LService typeMass Airflow Sensor ReplacementEstimate$760.59Shop/Dealer Price$937.01 - $1443.72
1993 Volvo 960L6-2.9LService typeMass Airflow Sensor ReplacementEstimate$760.59Shop/Dealer Price$937.01 - $1443.72
1994 Volvo 960L6-2.9LService typeMass Airflow Sensor ReplacementEstimate$760.59Shop/Dealer Price$936.99 - $1443.68
1997 Volvo 960L6-2.9LService typeMass Airflow Sensor ReplacementEstimate$442.29Shop/Dealer Price$539.15 - $807.15
1996 Volvo 960L6-2.9LService typeMass Airflow Sensor ReplacementEstimate$442.29Shop/Dealer Price$539.13 - $807.12
Show example Volvo 960 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

Gregory

15 years of experience
21 reviews
Gregory
15 years of experience
Volvo 960 L6-2.9L - Intake Manifold Gaskets - Vallejo, California
Did job in my driveway I woke up and car was fixed!

Joe

43 years of experience
822 reviews
Joe
43 years of experience
Volvo 960 L6-2.9L - Exterior Door Handle Replacement (Driver Side Front) - Pinellas Park, Florida
Very efficient and reliable.

Joe

43 years of experience
822 reviews
Joe
43 years of experience
Volvo 960 L6-2.9L - Brake Pads Replacement (Rear) - Pinellas Park, Florida
Everything went well!

Lucas

21 years of experience
887 reviews
Lucas
21 years of experience
Volvo 960 L6-2.9L - Brake Pads Replacement (Front) - North Hollywood, California
Only mechanic I want to work with.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Volvo 960 services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How Do Rain-Sensing Wipers Work?
Several Several decades ago, the only settings windshield wipers came with were low, high, and off. Later, an intermittent wiper feature was integrated into many windshield wiper switches, allowing drivers to reduce the frequency of wiper movements based on the...
4 Essential Things to Know About Your Car’s Check Engine Light
The Check Engine Light turns on when there's an engine problem. A bad oxygen sensor or failed spark plug are common causes for the Check Engine Light.
How to Replace an Oil Pressure Sensor on Most Cars
Oil pressure sensors fail if the sensor light blinks or stays on constantly when the pressure if acceptable or when the gauge is at zero.

The car won't start, but I think it is the crank sensor, not the starter.

It is possible that your crank sensor may be at fault for your vehicle not starting. If the crank sensor goes bad (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) the engine can not fire the spark plugs or the fuel injectors. This is a pretty common...

Speedometer not working when warm.

Due to the fact this condition is caused by both outside weather and engine temperature I am inclined to look at the vehicle speed sensor side of the circuit as interior cabin temperature is less effected especially by engine temperature....

Need my 2004 Freestar camsfaft synchronizer replaced, cost?? 2004 Ford Freestar

Hi there - from your description, it is hard to tell whether you need the [camshaft position sensor](https://www.yourmechanic.com/article/how-long-does-a-camshaft-position-sensor-last, or the camshaft position actuator (sometimes called the variable valve timing actuator or solenoid (https://www.yourmechanic.com/services/variable-valve-timing-vvt-solenoid-replacement)). Please forward the problem codes (Pxxxx) for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com