Volvo 240 Neutral Safety Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Neutral Safety Switch Replacement Service

How much does a Neutral Safety Switch Replacement cost?

On average, the cost for a Volvo 240 Neutral Safety Switch Replacement is $129 with $34 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Volvo 240L4-2.3LService typeNeutral Safety Switch ReplacementEstimate$182.17Shop/Dealer Price$208.97 - $266.85
1992 Volvo 240L4-2.3LService typeNeutral Safety Switch ReplacementEstimate$162.17Shop/Dealer Price$188.98 - $246.88
1991 Volvo 240L4-2.3LService typeNeutral Safety Switch ReplacementEstimate$162.17Shop/Dealer Price$188.98 - $246.88
1993 Volvo 240L4-2.3LService typeNeutral Safety Switch ReplacementEstimate$162.17Shop/Dealer Price$188.96 - $246.84
Show example Volvo 240 Neutral Safety Switch Replacement prices

What is the Neutral Safety Switch all about?

The neutral safety switch keeps the vehicle from starting when in any gear position other than Park or Neutral. In some vehicles, the switch also monitors gear selection and reverse light feedback data for the vehicle’s computer. Most often mounted to the left-hand side of the transmission, the switch is equipped in vehicles with a transaxle or automatic transmission. Some vehicle neutral safety switches are attached to the shifter mechanism.

Keep in mind:

  • Connected to the starter solenoid, the neutral safety switch completes the starter circuit, allowing the power from the battery to reach the starter only while the gearshift remains in Park or Neutral.
  • The mechanic will check the other systems in your vehicle’s ignition system, such as the starter, battery, and alternator, to make sure those parts are not causing the problem.
  • As a vehicle ages, the neutral safety switch deteriorates.

How it's done:

  • The vehicle is raised and supported on jack stands. The transmission shift lever and cable are removed. The electrical connector is removed from the switch.

  • The neutral safety switch is removed from the transmission. The transmission shaft seal is checked for leaks and replaced as needed.

  • The new neutral safety switch is installed on to the selector shaft and secured while aligning for proper installation alignment.

  • The shift lever and shift cable are reinstalled. The vehicle is checked for proper neutral safety switch operation before the vehicle is lowered off the jack stands.

  • The vehicle is scanned for codes and proper switch indication of gear ranges and road tested for proper operation.

Our recommendation:

Replace a faulty neutral safety switch as soon as possible; otherwise, the vehicle will stop working or suffer engine damage. When the switch does not work properly, the vehicle might jump into gear upon startup. This not only causes damage to the engine itself, but poses a great physical threat to surrounding objects and people. Our expert mechanics will diagnose the neutral safety switch to see if it needs adjustment.

Transmissions that exhibit excessive vibrations cause the switch to go out of alignment over time, which makes vehicle ignition more difficult. When inspecting the neutral safety switch, our expert mechanics check for dirt and grease build-up, moisture, and corrosion. They will also use a test light to confirm a connection through the switch to the starter solenoid.

What common symptoms indicate you may need to replace the Neutral Safety Switch?

  • Engine turns over in any gear, indicating that the neutral safety switch does not work properly and needs replacement
  • Vehicle doesn’t turn over when in Park or Neutral
  • Check Engine Light turns on after ignition

How important is this service?

Replace a faulty neutral safety switch promptly, as driving without a functional switch presents a danger to other drivers, passengers, and those around the vehicle. A faulty neutral safety switch damages the engine, as the vehicle jerks into gear upon startup. The reverse lights could stop working on some vehicles, which creates a safety hazard especially during inclement weather or nighttime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1

Nezar

26 years of experience
67 reviews
Nezar
26 years of experience
Volvo 240 L4-2.3L - Alternator Repair - Boca Raton, Florida
It was awesome. He showed up early was friendly and knowledgeable. He finished the job in a reasonable amount of time and showed me that the work had been completed.

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Volvo 240 L4-2.3L - Brakes, Steering and Suspension Inspection - Pleasanton, California
Excellent and prompt service as always! Diagnosed the problem quickly and determined that the power steering issue was a simple and much less costly fix rather than having to do significant repairs. Highly recommend!!

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Volvo 240 L4-2.3L - Brake Light Switch - Dublin, California
Tien took care of the repair very quickly! Definitely recommend.

Nicholas

21 years of experience
354 reviews
Nicholas
21 years of experience
Volvo 240 L4-2.3L - Brake Pads Replacement (Front) - Denver, Colorado
Arrived on time. Work was preformed efficiently and professionally..

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1
Number of Volvo 240 services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

P0188 OBD-II Trouble Code: Fuel Temperature Sensor "B" Circuit High Input
P0188 P0188 trouble code definition Fuel Temperature Sensor "B" Circuit High Input What the P0188 code means The fuel temperature sensor identifies the presence of contamination, such as water, ethanol, or dirt. It also measures the fuel temperature inside the...
P0325 OBD-II Trouble Code: Knock Sensor Malfunction (Sensor 1, Bank 1)
P0325 code definition Knock Sensor Malfunction (Sensor 1, Bank 1) What the P0325 code means P0325 is a general ODB2 diagnostic trouble...
B1907 OBD-II Trouble Code: Air Bag Crash Sensor #2 Ground Circuit Failure
B1907 means there is a malfunction with the #2 airbag crash sensor circuit, likely because of damaged electrical components or a faulty sensor.

Power steering fluid leak

Power steering leaks are pretty common on trucks like yours. The power steering pump builds the pressure necessary to provide power assist to your gear. The high pressure fluid flows from the pump to the gear via a high pressure...

Pickup coil shield missing on new distributor.

There is more than one manufacturer of distributors or its internal components and will operate the same way but have some small different changes that do not affect the performance of the part. You should not have any problems without...

I have a 2006 crown Vic my car won't go forward but it will go backward im not sure what the problem is but I was told it could be

Hello. Most of the time this is caused by a failure in the transmission forward clutch pack. I usually check the transmission fluid and drop the pan to check for debris. If there is then the transmission needs to be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com