Volkswagen Routan Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(72)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(72)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Volkswagen Routan Valve Cover Gasket Replacement is $430 with $150 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Volkswagen RoutanV6-3.8LService typeValve Cover Gasket ReplacementEstimate$610.02Shop/Dealer Price$692.23 - $922.64
2012 Volkswagen RoutanV6-3.6LService typeValve Cover Gasket ReplacementEstimate$894.53Shop/Dealer Price$1024.57 - $1403.56
2011 Volkswagen RoutanV6-3.6LService typeValve Cover Gasket ReplacementEstimate$894.53Shop/Dealer Price$1024.64 - $1403.68
2010 Volkswagen RoutanV6-3.8LService typeValve Cover Gasket ReplacementEstimate$592.00Shop/Dealer Price$670.72 - $898.52
2009 Volkswagen RoutanV6-4.0LService typeValve Cover Gasket ReplacementEstimate$914.04Shop/Dealer Price$1013.20 - $1281.46
2014 Volkswagen RoutanV6-3.6LService typeValve Cover Gasket ReplacementEstimate$894.53Shop/Dealer Price$1025.02 - $1404.34
2013 Volkswagen RoutanV6-3.6LService typeValve Cover Gasket ReplacementEstimate$894.53Shop/Dealer Price$1024.68 - $1403.75
2010 Volkswagen RoutanV6-4.0LService typeValve Cover Gasket ReplacementEstimate$914.04Shop/Dealer Price$1007.46 - $1271.40
Show example Volkswagen Routan Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(72)

Rating Summary
70
0
0
0
2
70
0
0
0
2

Arturo

28 years of experience
303 reviews
Arturo
28 years of experience
Volkswagen Routan V6-4.0L - Alternator - Chula Vista, California
Arturo was quick and efficient. He definitely needs to get some kind of bonus for this review because he brings great value to this company. He was friendly and professional. I definitely will be requesting him for any other mechanical work

Brian

19 years of experience
138 reviews
Brian
19 years of experience
Volkswagen Routan V6-3.8L - Thermostat - Conyers, Georgia
Thanks for great service!

Jerome

35 years of experience
206 reviews
Jerome
35 years of experience
Volkswagen Routan V6-4.0L - Brake Pads Replacement (Rear) - Columbia, Maryland
He is a guy attention to detail. He has gone the extra mile to run diagnostics on my car even the service was just for replacing the Rear brake.

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Volkswagen Routan V6-3.8L - Power Steering Pump - Buford, Georgia
Dan showed up on time then got right to work and finished the job quickly. Vehicle runs great and no more Power Steering whine! Dan knows what he is doing!! I would be happy to hire him again to take care of any of my vehicles!!!

Excellent Rating

(72)

Rating Summary
70
0
0
0
2
70
0
0
0
2
Number of Volkswagen Routan services completed
792+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

P0275 OBD-II Trouble Code: Cylinder 5 Contribution/Balance Fault
P0275 means that there is something is wrong with the way the fifth cylinder is processing fuel due to the fuel injector.
Symptoms of a Bad or Failing Drive Belt Tensioner
Common signs include grinding or squeaking noises coming from the belt, unusual belt wear, and belt-driven accessories like the alternator failing.
Cell Phones and Texting: Distracted Driving Laws in Florida
Florida Florida defines distracted driving as anything that takes your mind off the road, hands off the wheel, or your eyes away from the road. Since 2012, distracted driving crashes have increased by 25 percent. Distractions Texting Reaching for a...

Lots of rust on a newish car, what happened?

Unfortunately, there is no stop to rust. It happens to all cars that are regularly exposed to the elements, but some parts of the country are worse than others. But don’t worry, Nissan is aware of the issue and has...

Steering wheel vibration when braking

Most likely, your tires and/or wheels are out of balance. Balance problems are typically most evident at speeds above 45 miles per hour. A professional can inspect your vehicle to determine if this is indeed the issue. If it is,...

New car battery, but there is no power to the car

Hello and thank you for contacting YourMechanic. Check the fuse box for any blown fuses (https://www.yourmechanic.com/services/fuse-replacement) that could have popped while the vehicle was at rest. If all of the fuses are okay, then check the condition of the battery...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com