Volkswagen Cabriolet Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Exhaust Gas Recirculation/EGR Valve Replacement Service

How much does a Exhaust Gas Recirculation/EGR Valve Replacement cost?

On average, the cost for a Volkswagen Cabriolet Exhaust Gas Recirculation/EGR Valve Replacement is $432 with $292 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Volkswagen CabrioletL4-1.8LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$746.02Shop/Dealer Price$897.38 - $1343.34
1993 Volkswagen CabrioletL4-1.8LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$737.01Shop/Dealer Price$886.60 - $1331.24
1992 Volkswagen CabrioletL4-1.8LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$737.01Shop/Dealer Price$886.62 - $1331.28
1991 Volkswagen CabrioletL4-1.8LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$737.01Shop/Dealer Price$886.62 - $1331.28
Show example Volkswagen Cabriolet Exhaust Gas Recirculation/EGR Valve Replacement prices

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0

Torrieanto

13 years of experience
632 reviews
Torrieanto
13 years of experience
Volkswagen Cabriolet L4-1.8L - Car starts and then dies - Clearwater, Florida
Mr. Ward arrived on time and induced himself. He went right to work. He was thorough and explained what he was doing and why. He was pleasant and polite. He fixed the problem. I am very happy and would recommend to everyone. Thank you Mr. Ward.

Gerron

35 years of experience
185 reviews
Gerron
35 years of experience
Volkswagen Cabriolet L4-1.8L - Car is not starting - Beaverton, Oregon
Very knowledgeable and very nice guy !

Kevin

34 years of experience
234 reviews
Kevin
34 years of experience
Volkswagen Cabriolet L4-1.8L - Pre-purchase Car Inspection - Paramount, California

John

33 years of experience
1126 reviews
John
33 years of experience
Volkswagen Cabriolet L4-1.8L - Car is not starting - Friendswood, Texas
Very knowledgeable and personable. Gave me information that I needed

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0
Number of Volkswagen Cabriolet services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

P0254 OBD-II Trouble Code: Injection Pump Fuel Metering Control “A” High (Cam/Rotor/Injector)
The The P0254 Trouble Code indicates issues with the inject pump fuel metering control “A” high (cam/rotor/injector). What the P0254 code means When this code appears, it means that the powertrain control module has found an issue with the signal...
How to Do a Tire Safety Inspection
Car tires are a big part of staying safe on the road. Check tire inflation, tread depth, and sidewalls to make sure they're in good shape.
How Much Does a Mechanic Make in North Carolina?
Automotive technician jobs in North Carolina have an average mechanic salary of $40k, while the national average is roughly $37k.

Car shut off and remained unresponsive since then - 2010 Mercedes-Benz S400 Hybrid

Hello. The PCM is a potential cause of the problem that you are experiencing. The PCM is the main computer for the car and could be malfunctioning. There could also be a problem with the electric motor of the hybrid...

turn signal works when acc is on and it wont work when started . Right side

Hi and thanks for contacting YourMechanic. What seems to be happening is the cluster control module has a short in it. The control module is under the dash on the driver side. I recommend replacing the cluster control module. The...

My engine is slightly knocking. I need to replace oil pump. Will it be worth replacing? Will the engine be okay after replacment?

It is very likely that the engine could be bad based on the sound. Most likely the oil pump going out caused other damage. On an older vehicle such as a 1992, the cost if an engine replacement may exceed...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com