Toyota Supra Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Toyota Supra Distributor Replacement is $567 with $385 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
Show example Toyota Supra Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(15)

Rating Summary
14
1
0
0
0
14
1
0
0
0

Jim

34 years of experience
225 reviews
Jim
34 years of experience
Toyota Supra L6-3.0L - Exterior Door Handle Replacement (Driver Side Front) - Pleasanton, California
Extremely professional and knew what he was doing. Finished in less than quoted time. Superior quality work. Glad I selected him and will definitely use him again.

Tavaris

15 years of experience
93 reviews
Tavaris
15 years of experience
Toyota Supra L6-3.0L - Starter - Atlanta, Georgia
Great and reliable mechanical! Very knowledgeable and takes the time to explain any problems.

Brian

16 years of experience
60 reviews
Brian
16 years of experience
Toyota Supra L6-3.0L - Oil Change - Fort Lauderdale, Florida

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Toyota Supra L6-3.0L - Heater Hoses - Redmond, Washington
Theo does a great job on the repairs and clean up. I will continue to use him.

Excellent Rating

(15)

Rating Summary
14
1
0
0
0
14
1
0
0
0
Number of Toyota Supra services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Replace a Car Air Conditioning (AC) Compressor
If the AC compressor fails, it can cause the air conditioning system not to work. This article covers how to locate, remove, and install a compressor.
What Is the Purpose of Engine Gaskets?
Engine gaskets work as seals to maintain pressure, hold fluids, and prevent debris from entering the engine. Gaskets are vital for engine performance.
A Buyer’s Guide to the 2012 Mazda 6
The The Mazda 6 is a luxurious alternative to the everyday family sedan. It has decent fuel economy with an upscale look on both the inside and the outside. The vehicle also handles well on the highway and is comfortable...

How do you replace the battery in the remote transmitter?

Your car’s remote gives you the ability to lock and unlock the doors from a distance, as well as open the trunk without using the key or the trunk release latch. However, the battery in your remote will eventually die...

My car shuts off while driving and then turns back on multiple times or shuts off after driving and car turns off.

Hi there. Check the alternator and make sure that the wiring it connected tight. Check the battery cables and make sure that they are tight and clean. Look for any loose ground wires to the chassis on the vehicle. If...

What does my car start shaking when idling 1997 Ford Taurus

Hello. This can be caused by a number of things. Most of the time the issue is caused from a vacuum leak in the engine or a failure in the idle control valve. This is only true if the issue...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com