Toyota Previa Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Toyota Previa Control Arm Assembly Replacement is $402 with $206 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Toyota PreviaL4-2.4L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$674.74Shop/Dealer Price$783.67 - $1096.69
1993 Toyota PreviaL4-2.4LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$665.70Shop/Dealer Price$773.20 - $1088.68
1991 Toyota PreviaL4-2.4LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$636.51Shop/Dealer Price$743.67 - $1058.91
1995 Toyota PreviaL4-2.4L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$665.70Shop/Dealer Price$773.24 - $1088.75
1995 Toyota PreviaL4-2.4L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$636.51Shop/Dealer Price$745.88 - $1062.77
1997 Toyota PreviaL4-2.4L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$615.63Shop/Dealer Price$721.23 - $1031.76
1995 Toyota PreviaL4-2.4L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$665.70Shop/Dealer Price$773.27 - $1088.80
1994 Toyota PreviaL4-2.4LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$636.51Shop/Dealer Price$743.67 - $1058.90
Show example Toyota Previa Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(20)

Rating Summary
19
1
0
0
0
19
1
0
0
0

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Toyota Previa L4-2.4L - Ignition Ignitor Replacement - Newport Beach, California
knowledgeable and courteous

Whitney

40 years of experience
783 reviews
Whitney
40 years of experience
Toyota Previa L4-2.4L - Car is not starting - San Jose, California
Whitney arrived within the promissed time window, after asking some questions about my car's problem went about searching and diagnosing . He found the cause, explained it to me clearly and solved the problem. I was impressed with his skill plus how meticulously reconnected all the disconnected parts and leaving the car and the place clean. He is a true Master Mechanic.

Jerome

35 years of experience
206 reviews
Jerome
35 years of experience
Toyota Previa L4-2.4L - Car is not starting - Silver Spring, Maryland
It was a very good service/inspection work done for my car. Thanks

Mauricio

41 years of experience
85 reviews
Mauricio
41 years of experience
Toyota Previa L4-2.4L - Brake Pads Replacement (Front) - Los Angeles, California
Very friendly guy.

Excellent Rating

(20)

Rating Summary
19
1
0
0
0
19
1
0
0
0
Number of Toyota Previa services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Become an Electric Car Mechanic
As electric cars become mainstream and alternative-fuel technology advances, there is a growing demand for mechanics qualified to work on them.
How Long Does a Brake Light Bulb Last?
Having Having properly working lights on your car is important when driving on busy roadways. Making sure that the other motorists see you and what you are doing can help to eliminate the risk of an accident. Most of the...
How Long Does an AC Compressor Belt Last?
For For the air conditioning system in your car to work properly, it has to pressurize refrigerant. That is the function of the AC compressor. The compressor itself gets a signal from the AC relay, and is operated by a...

engine will not start now, after repairs first to the transmission, then alternator and new battery and last, a new fuel pump

If all the other problems started to happen after the transmission was removed and rebuilt, I would suspect that a wire harness has not been connected good or got pinned between the engine and transmission. I would also look for...

Car making helicopters/clicking noise when in reverse

Based on the information you provided, there is no obvious connection between the starting circuit fault and the noise that occurs in reverse. Unless the issue is wheel bearing, brake, or axle related your supposition about the noise being from...

I got in my car (2015 Nisaan Rogue) everything looked normal as soon as I turned the key ALL electronics turned off. I hear a faint clicking and flashes of a symbol with a car and key . I returned a few hours later and the issue wasn't there. Then the issue reappeared the following day.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com