Toyota Corolla Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(150)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(150)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Toyota Corolla Car Battery Replacement is $291 with $151 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Toyota CorollaL4-1.8LService typeCar Battery ReplacementEstimate$456.02Shop/Dealer Price$534.88 - $763.34
1991 Toyota CorollaL4-1.6LService typeCar Battery ReplacementEstimate$447.01Shop/Dealer Price$524.10 - $751.24
2010 Toyota CorollaL4-2.4LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.82 - $795.60
2017 Toyota CorollaL4-1.8LService typeCar Battery ReplacementEstimate$447.01Shop/Dealer Price$524.12 - $751.28
2013 Toyota CorollaL4-1.8LService typeCar Battery ReplacementEstimate$447.01Shop/Dealer Price$525.60 - $753.86
1995 Toyota CorollaL4-1.8LService typeCar Battery ReplacementEstimate$447.01Shop/Dealer Price$524.26 - $751.53
1997 Toyota CorollaL4-1.8LService typeCar Battery ReplacementEstimate$447.01Shop/Dealer Price$524.14 - $751.31
1993 Toyota CorollaL4-1.8LService typeCar Battery ReplacementEstimate$447.01Shop/Dealer Price$524.12 - $751.28
Show example Toyota Corolla Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(150)

Rating Summary
146
1
1
0
2
146
1
1
0
2

Nezar

22 years of experience
15 reviews
Nezar
22 years of experience
Corolla 2006 - Battery - Fort Lauderdale, FL
Great

Ramtin

10 years of experience
9 reviews
Ramtin
10 years of experience
Corolla 2009 - Battery - Charlotte, NC
Very professional.

Luis

14 years of experience
288 reviews
Luis
14 years of experience
Corolla 2003 - Battery - Jersey City, NJ
Friendly, honest, provided very good service. Would recommend

Robert

3 years of experience
61 reviews
Robert
3 years of experience
Corolla 2011 - Battery - Tacoma, WA
Robert was great. Arrived early and had my car fixed quickly!

Excellent Rating

(150)

Rating Summary
146
1
1
0
2
146
1
1
0
2
Number of Toyota Corolla Car Battery Replacement services completed
1650+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

B1335 OBD-II Trouble Code: Door Ajar Right Rear Circuit Failure
B1335 means there is an issue with the right rear door ajar circuit, likely due to a defective door ajar switch or latch, or circuit failure.
What Does the Bulb Failure (Exterior Light Fault, License Plate Bulb, Brake Light Bulb) Warning Light Mean?
The bulb failure light turns on when any exterior light on your car isn't working. It's important to fix this so others can see your car's position.
How to Renew Your Car Registration in Oklahoma
Having Having your car registered with the Oklahoma Tax Commission is an important part of driving legally in this state. You will need to do this within 30 days of moving to Oklahoma or you may have to pay a...

Frank, Id like to install cruise control into a chevy express 1500 AWD that currently does not have it. Is that possible? 2012 Chevrolet Express 1500

Hi there - yes, that would be possible, although the cost effectiveness of adding this feature to your current vehicle may not make sense. Adding cruise control could be done by either finding another Express van in a recycling yard,...

Code P2102

Hi there. A sensor on the accelerator pedal arm sends a voltage signal to the ECM (or related control module), which then commands the throttle body to open or close. Voltage signals sent from the ECM will activate the throttle...

My 2008 Mini Cooper S has a check engine light on and the code is P0977.

The code P0977 (https://www.yourmechanic.com/article/p0977-obd-ii-trouble-code-shift-solenoid-b-control-circuit-high-by-brady-klopfer) will set if the transmission control module (TCM) records an abnormal voltage reading from a shift solenoid in the transmission. A vehicle with the P0977 trouble code will generally be driveable but due to the potential...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com