Suzuki Vitara Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Suzuki Vitara Control Arm Assembly Replacement is $303 with $163 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Suzuki VitaraL4-2.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$620.52Shop/Dealer Price$708.87 - $958.51
2002 Suzuki VitaraL4-2.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$472.01Shop/Dealer Price$555.35 - $801.24
1999 Suzuki VitaraL4-1.6LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$486.61Shop/Dealer Price$570.16 - $816.21
1999 Suzuki VitaraL4-1.6LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$603.40Shop/Dealer Price$688.44 - $935.60
2004 Suzuki VitaraV6-2.5LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$472.01Shop/Dealer Price$556.85 - $803.86
2002 Suzuki VitaraL4-2.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$472.01Shop/Dealer Price$555.51 - $801.53
2002 Suzuki VitaraL4-2.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$472.01Shop/Dealer Price$555.39 - $801.31
2004 Suzuki VitaraV6-2.5LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$472.01Shop/Dealer Price$555.37 - $801.28
Show example Suzuki Vitara Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Ben

26 years of experience
22 reviews
Ben
26 years of experience
Suzuki Vitara V6-2.5L - Exterior Door Handle Replacement (Driver Side Front) - Norman, Oklahoma
Arrived on time. Was very friendly and completed the work quickly.

Chris

21 years of experience
448 reviews
Chris
21 years of experience
Suzuki Vitara L4-2.0L - Banging noises when driving over the bumps - Vancouver, Washington
Awesome, friendly and quick service. Cool guy all around.

Adam

18 years of experience
263 reviews
Adam
18 years of experience
Suzuki Vitara L4-2.0L - Radiator - Lake Worth, Florida
Punctual, Personable Experienced mechanic

Rodric

15 years of experience
418 reviews
Rodric
15 years of experience
Suzuki Vitara L4-2.0L - Serpentine/Drive Belt - Redlands, California
My experience was very good. The process was smooth and my car is running like a champ now.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Suzuki Vitara services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

P0090 OBD-II Trouble Code: Fuel Pressure Regulator 1 Control Circuit
P0090 code definition A P0090 diagnostic trouble code is referencing an issue with the fuel pressure regulator circuit. This code is similar...
What are the Car Pool Rules in North Carolina?
North North Carolina is a state known more for its rural, scenic regions (https://www.yourmechanic.com/article/top-10-scenic-drives-in-north-carolina) than its large cities. But with tech companies booming in the Research Triangle, North Carolina has become a hotspot with a large number of workers. Many...
How to Get Smog Technician Certified in California
Automotive technician jobs include smog certified emissions inspectors. In California, you need to work at an emissions testing station.

Getting random misfire code.

Your Chrysler sets a P0300 random or multiple misfire code when more than a 1.8% misfire rate is measured during two trips. Countless issues can set this code, from a vacuum leak to a bad coil pack. Your engine is...

Car radio dead

Hello, this could be a simple problem to fix. If the fuse is blown it will cause the radio to have no power. You could also just have a bad radio, and if this is the case, the radio unit...

Using Bar's stop leak for timing chain cover leak

Stop leak products are generally an amateur, unprofessional solution to a TECHNICAL problem. Factory Service Manuals do NOT recommend or specify stop leak products BECAUSE such products are NOT considered to be an acceptable repair strategy, save for rare exceptions....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com