Suzuki SX4 Crossover ABS Light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(464)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(464)

ABS Light is on Inspection Service

How much does a ABS Light is on Inspection cost?

On average, the cost for a Suzuki SX4 Crossover ABS Light is on Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Suzuki SX4 CrossoverL4-2.0LService typeABS Light is on InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Suzuki SX4 Crossover ABS Light is on Inspection prices

How this system works:

When an issue arises with your anti-lock brake system (ABS), a corresponding light will illuminate on your dashboard. The light will display as the acronym “ABS.”

Your ABS exists to keep your car from skidding dangerously during braking. It is an automated safety system that recognizes when your wheels stop rotating (while your car is still in motion) and releases brake fluid pressure, allowing the wheels to continue to rotate. This stops your car from locking up and skidding uncontrollably, and returns the control of the vehicle to you.

Like most systems in your vehicle, your ABS can falter, and you’ll want to resolve the issue as soon as it does.

Common reasons for this to happen:

Faulty Wheel Speed Sensor

The ABS relies on information from the wheel speed sensors, which are placed inside the hub of each wheel and occasionally inside the transmission. These sensors determine the rate at which the wheels are moving, and relay that information to the ABS. When the ABS receives information that one or more of the vehicle’s wheels are moving slower than the others, the system releases brake fluid pressure, which then allows the wheels to resume movement. If the wheel speed sensor is defective, or if the wiring from the sensor to the ABS is damaged, then the ABS will not get the wheel speed information that it requires.

The wheel speed sensor is made up of two components: a metal ring with teeth attached to a drive axle or wheel bearing, and the sensor itself, which reads the teeth on the ring as the wheel rotates. As the wheel speed sensor is located very close to the braking system, the high heat generated by the brakes cause the wheel speed sensor to be more susceptible to damage. This in turn makes it one of the more common causes of the ABS light coming on.

Unresponsive Hydraulic Pump or Valve

When the wheel speed sensor alerts the ABS that the wheels are moving at different speeds, a hydraulic valve is responsible for releasing, or increasing, the brake fluid pressure to prevent the wheels from losing traction with the ground. Like all pumps and valves, those connected to the ABS are liable to become damaged and unresponsive. This may be due to internal wear typically from dirty brake fluid.

Faulty ABS Module

Corrosion on the ABS module can keep information from being relayed between the wheel speed sensor and the ABS. Corrosion is a relatively common issue, and one that can cause problems in the aforementioned wheel speed sensor wires. Even a small amount of corrosion can cause enough resistance on the wires to keep the system from working. In less common instances, the computer in the module can fail and need to be replaced.

Low Fluid Levels

The ABS relies on fluid to help regulate pressure. If the ABS fluid reservoir is low, or if there is too much air in the system, then the ABS will not be able to do its job.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the ABS issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will have a scan tool, which allows them to “talk” to the ABS module to find out what is causing the light to come on. The mechanic will check the ABS fuse, and then review the entire ABS system for problems.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(464)

Rating Summary
435
20
1
2
6
435
20
1
2
6

Andrew

11 years of experience
845 reviews
Andrew
11 years of experience
Suzuki SX4 L4-2.0L - Oil Change - Kansas City, Missouri
Andrew has helped me out before. He professional, kind and most importantly, honest.

Peter

27 years of experience
86 reviews
Peter
27 years of experience
Suzuki Forenza L4-2.0L - Car is not starting - Fresno, California
Very punctual described everything that was wrong with my car excellent customer service

Matthew

12 years of experience
183 reviews
Matthew
12 years of experience
Suzuki Esteem L4-1.8L - Car is not starting - Indianapolis, Indiana
Very professional. Quick and reliable

Jorge

14 years of experience
23 reviews
Jorge
14 years of experience
Suzuki Forenza L4-2.0L - Serpentine/Drive Belt - Orlando, Florida
He was able to tell us what else we had wrong with the car

Excellent Rating

(464)

Rating Summary
435
20
1
2
6
435
20
1
2
6
Number of Suzuki services completed
5104+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

2012 Kia Soul vs. 2012 Nissan Cube: Which One Should I Buy?
While technically these two vehicles fall into the “small wagon” classification, they look like nothing more than boxes on wheels. Some people are really into this design, while others are completely opposed to it. If you’re in the former camp,...
P0228 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch C Circuit High Input
P0228 P0228 code definition Throttle/Pedal Position Sensor/Switch C Circuit High Input What the P0228 code means P0228 is a generic OBD-II code which indicates that the throttle/pedal position sensor/switch C circuit has a high input problem causing the sensor input...
P0298 OBD-II Trouble Code: Engine Oil Over Temperature Condition
P0298 means that the engine is or has recently overheated due to low coolant level, faulty cooling fan, thermostat, or radiator.

Should I try to salvage my car that has a knocking noise do to insufficient supply of oil or do I just buy a new car?

Hello, thank you for writing in. With the issues you are having, the problem may be more serious then the car is worth. You will want to consider all of the potential costs to have it fixed. This may require...

Egr valve insufficient flow

Insufficient EGR flow is probably not the cause of the rough or low idle and thus is just a coincidental fault. You should repair it and perhaps first, just to be absolutely sure, but rough idle is more likely due...

Starter connecting bracket

This would depend on if the starter itself is loose or not. If the starter is still starting the vehicle just fine and does not appear to be loose, you should be able to get by for a while. However...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com