Subaru Tribeca Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(21)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(21)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Subaru Tribeca Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Subaru TribecaH6-3.6LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2011 Subaru TribecaH6-3.6LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2010 Subaru TribecaH6-3.6LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2009 Subaru TribecaH6-3.6LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2012 Subaru TribecaH6-3.6LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2014 Subaru TribecaH6-3.6LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2013 Subaru TribecaH6-3.6LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
Show example Subaru Tribeca Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(21)

Rating Summary
20
0
0
1
0
20
0
0
1
0

Royal

16 years of experience
80 reviews
Royal
16 years of experience
Subaru Tribeca H6-3.6L - Starter - San Antonio, Texas
Recommended

Richard

13 years of experience
601 reviews
Richard
13 years of experience
Subaru Tribeca H6-3.6L - 3,000 Miles Maintenance Service - Las Vegas, Nevada
A+

Timothy

48 years of experience
201 reviews
Timothy
48 years of experience
Subaru Tribeca H6-3.6L - Pre-purchase Car Inspection - Plano, Texas
Tim was excellent!! Exceeded my expectations!

Nick

7 years of experience
12 reviews
Nick
7 years of experience
Subaru Tribeca H6-3.6L - Brake Pads Replacement (Front) - Sugar Land, Texas
Speedy, great work!

Excellent Rating

(21)

Rating Summary
20
0
0
1
0
20
0
0
1
0
Number of Subaru Tribeca services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
700+
experts on our platform

Recent articles & questions

P0154 OBD-II Trouble Code: O2 Sensor Circuit No Activity Detected (Bank 2 Sensor 1)
P0154 trouble code definition 02 Sensor Circuit No Activity Detected (Bank 2 Sensor 1) What the P0154 code means The oxygen sensor’s...
P0488 OBD-II Trouble Code: Exhaust Gas Recirculation Throttle Control Circuit "A" Range/Performance
What What the P0488 code means The Powertrain Control Module (PCM) has discovered a problem with the rate of flow of the exhaust gas recirculation (EGR) system. What causes the P0488 code? There are a few potential causes for the...
Great-paying Auto Mechanic Jobs Near You
Looking for an auto mechanic job? Find a ton of great paying jobs for auto technicians near where you live.

Car lost all power after downshifting to go uphill

Hello! Although the Check Engine Light has been on before a new issue may have occurred, I would suggest hooking a scan tool up to the vehicle (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) and retrieving the OBD2 codes. The problem you're having should almost certainly...

Brake pedal goes 3/4 down of the way down then catches

The first thing i would check it to make sure the brake pedal to brake booster arm bushing is not worn out. Check the brake pedal free travel with your hand to see if it is more than a 1/2...

2011 chevy impala makes clicking sound when i turn on the AC. Clicking will continue even after car is turned off, and does not st

The clicking sound you are hearing is the blend door actuator. This is a common problem on the Chevy Impala. The blend door actuator is responsible for moving the blend door. The blend door is responsible for blocking off the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com