Subaru Tribeca Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(24)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(24)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Subaru Tribeca Throttle Body Replacement is $735 with $595 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Subaru TribecaH6-3.6LService typeThrottle Body ReplacementEstimate$1344.46Shop/Dealer Price$1645.43 - $2540.22
2014 Subaru TribecaH6-3.6LService typeThrottle Body ReplacementEstimate$1335.45Shop/Dealer Price$1634.65 - $2528.12
2012 Subaru TribecaH6-3.6LService typeThrottle Body ReplacementEstimate$1335.45Shop/Dealer Price$1634.67 - $2528.16
2009 Subaru TribecaH6-3.6LService typeThrottle Body ReplacementEstimate$1335.45Shop/Dealer Price$1634.67 - $2528.16
2013 Subaru TribecaH6-3.6LService typeThrottle Body ReplacementEstimate$1335.45Shop/Dealer Price$1636.15 - $2530.74
2011 Subaru TribecaH6-3.6LService typeThrottle Body ReplacementEstimate$1335.45Shop/Dealer Price$1634.81 - $2528.41
2010 Subaru TribecaH6-3.6LService typeThrottle Body ReplacementEstimate$1335.45Shop/Dealer Price$1634.69 - $2528.19
Show example Subaru Tribeca Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(24)

Rating Summary
23
0
0
1
0
23
0
0
1
0

Alexander

7 years of experience
126 reviews
Alexander
7 years of experience
Subaru Tribeca H6-3.6L - Serpentine/Drive Belt - Dublin, Ohio
Professional experienced and great communication. Clearly able to identify the problem and fix it quickly. Thank you so much Alexander.

Dante

37 years of experience
98 reviews
Dante
37 years of experience
Subaru Tribeca H6-3.6L - UberX Inspection and Oil Change Package - Huntington Beach, California

Luke

18 years of experience
322 reviews
Luke
18 years of experience
Subaru Tribeca H6-3.6L - Serpentine/Drive Belt Replacement - Austin, Texas
Seemed fair, quick and honest.

Curtis

30 years of experience
163 reviews
Curtis
30 years of experience
Subaru Tribeca H6-3.6L - Serpentine/Drive Belt - Augusta, Georgia
Evaluated my car for a problem I was told by the dealer I had and found that the dealer was wrong. Did not do the work since it wasn't required. I doubt the dealer would have done the same. I appreciated his honesty and professionalism.

Excellent Rating

(24)

Rating Summary
23
0
0
1
0
23
0
0
1
0
Number of Subaru Tribeca services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
800+
experts on our platform

Recent articles & questions

How to Prepare for the Virginia Driver’s Written Test
Before Before you can drive in Virginia, you need to take your driver’s written test so you can then get your learner’s permit and take the road test. You have to remember that driving is a privilege and not a...
How Does a Timing Belt Work?
The The timing belt is a belt made of rubber that keeps your camshaft and your crankshaft synchronized so that your valve timing is always right. Some vehicles have a timing chain instead of a belt, but it serves the...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Delaware
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Delaware, which are all completed by the state's DMV.

Car wont start

The problem you are having may be the EIS ECU not turning on intermittently. There is a technical service bulletin from the manufacturer dated 11/29/2012 and the number is LI80.57-P-053608. You will need to dealer or a mechanic that has...

Green fluid leaking in the rear of car

You have a leaking rear a/c heater system core or hose for the rear unit. You will need to keep the rear heater turned off and keep coolant in the engine full to prevent overheating the engine. Have the cooling...

Ignition relay

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com