Subaru BRZ Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(27)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(27)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Subaru BRZ Fuel Injector Replacement is $1117 with $977 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Subaru BRZH4-2.0LService typeFuel Injector ReplacementEstimate$2544.06Shop/Dealer Price$3095.72 - $4731.24
2014 Subaru BRZH4-2.0LService typeFuel Injector ReplacementEstimate$2555.32Shop/Dealer Price$3110.95 - $4767.96
2018 Subaru BRZH4-2.0LService typeFuel Injector ReplacementEstimate$2100.53Shop/Dealer Price$2591.02 - $4058.32
2013 Subaru BRZH4-2.0LService typeFuel Injector ReplacementEstimate$2555.32Shop/Dealer Price$3111.01 - $4768.06
2016 Subaru BRZH4-2.0LService typeFuel Injector ReplacementEstimate$2522.44Shop/Dealer Price$3073.45 - $4708.49
2015 Subaru BRZH4-2.0LService typeFuel Injector ReplacementEstimate$2555.32Shop/Dealer Price$3111.35 - $4768.65
Show example Subaru BRZ Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(27)

Rating Summary
25
1
1
0
0
25
1
1
0
0

Luis

19 years of experience
363 reviews
Luis
19 years of experience
Subaru BRZ H4-2.0L - Crankshaft Position Sensor Replacement - Union, New Jersey
Good

Isai

28 years of experience
230 reviews
Isai
28 years of experience
Subaru BRZ H4-2.0L - Oil Change - San Antonio, Texas

Ira

49 years of experience
283 reviews
Ira
49 years of experience
Subaru BRZ H4-2.0L - Battery - Tampa, Florida
.

Stacy

25 years of experience
511 reviews
Stacy
25 years of experience
Subaru BRZ H4-2.0L - Wheel Stud Replacement (Driver Side Front, Passenger Side Front, Driver Side Rear, Passenger Side Rear) - McDonough, Georgia
Great job with service, replaced my wheel studs and fixed my e-brake right before i needed to be at work. I couldn't find a single place that could replace wheel studs.

Excellent Rating

(27)

Rating Summary
25
1
1
0
0
25
1
1
0
0
Number of Subaru BRZ services completed
297+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
800+
experts on our platform

Recent articles & questions

Symptoms of Bad or Failing Air Spring Bags
If you experience that your car is having a bumpy ride and the suspension is sagging or bottoming out, you may need to replace the air spring bags.
How to Get a Car Loan While on Disability Income
A lot of things change when you go on disability (https://www.yourmechanic.com/article/how-to-get-a-free-car-when-you-have-a-disability) income. While those benefits allow you to pay living expenses as you cope with your disability, the income doesn’t cover much beyond the bare essentials. Just because you’re on...
A Buyer’s Guide to the 2012 Audi A3 TDI
Consumers Consumers steered clear of hatchbacks for a while but Audi has brought a stylish, functional, high-end option into the arena and buyers have responded. The A3 TDI offers all the versatility and performance you expect from Audi in a...

Replaced E38 computer on 2006 Pontiac g6. Should I try it out or does it need programming first?

The computer (ECM) will need programmed to the VIN of your vehicle before attempting to operate the vehicle. If you need further assistance with programming your computer, then seek out a professional, such as one from Your Mechanic, to help...

My 2008 Honda Accord blows hot air and the ac make Lois humming noise

To determine the exact fault, the system will have to be tested. You can obtain that service by requesting an a/c system diagnostic (https://www.yourmechanic.com/services/ac-is-not-working-inspection). If the a/c switch was set to "on" and you attached a can of refrigerant with...

Hi I have a new starter, alternator, and battery but my vehicle sometimes need jumping off it doesn't do it everyday???

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com