Saturn SL2 Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(137)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(137)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Saturn SL2 Intake Manifold Gaskets Replacement is $582 with $106 for parts and $476 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Saturn SL2L4-1.9LService typeIntake Manifold Gaskets ReplacementEstimate$1343.72Shop/Dealer Price$1423.06 - $1601.93
1993 Saturn SL2L4-1.9LService typeIntake Manifold Gaskets ReplacementEstimate$1117.36Shop/Dealer Price$1181.78 - $1349.47
1996 Saturn SL2L4-1.9LService typeIntake Manifold Gaskets ReplacementEstimate$1277.95Shop/Dealer Price$1344.57 - $1513.92
2002 Saturn SL2L4-1.9LService typeIntake Manifold Gaskets ReplacementEstimate$741.13Shop/Dealer Price$808.63 - $996.94
2000 Saturn SL2L4-1.9LService typeIntake Manifold Gaskets ReplacementEstimate$741.13Shop/Dealer Price$813.64 - $1005.71
2001 Saturn SL2L4-1.9LService typeIntake Manifold Gaskets ReplacementEstimate$741.13Shop/Dealer Price$809.11 - $997.78
1994 Saturn SL2L4-1.9LService typeIntake Manifold Gaskets ReplacementEstimate$1117.36Shop/Dealer Price$1182.03 - $1349.91
1995 Saturn SL2L4-1.9LService typeIntake Manifold Gaskets ReplacementEstimate$1117.36Shop/Dealer Price$1181.93 - $1349.73
Show example Saturn SL2 Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(137)

Rating Summary
125
8
1
2
1
125
8
1
2
1

Nathan

13 years of experience
12 reviews
Nathan
13 years of experience
SL2 1999 - Brake System Flush - Eugene, OR
See message in your mechanic log.

Michael

5 years of experience
89 reviews
Michael
5 years of experience
SL2 2000 - Car is not starting - Seattle, WA
Michael zeroed in on the problem and its root cause IMMEDIATELY and explained how it would be repaired in a simple and straightforward manner. After years of encountering surly mechanics, Michael restored my faith in people who love what they do and do good work!

David

5 years of experience
188 reviews
David
5 years of experience
SL2 2001 - Ignition Switch - Orlando, FL
There are no words guys the service was great and David my mechanic was very friendly and understanding.... This was my first experience with You and it's certainly not the last. I appreciate it guys. Keep up the good work.

Rodric

9 years of experience
477 reviews
Rodric
9 years of experience
SL2 1996 - Coolant is leaking - Norcross, GA
Very nice and knowledgeable guy

Excellent Rating

(137)

Rating Summary
125
8
1
2
1
125
8
1
2
1
Number of Saturn SL2 services completed
1507+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Ignition Cable (Spark Plug Wires)
Spark Spark plug wires connect the spark plug to what they’re creating a spark in. Whenever you are changing out your spark plugs, it’s a good idea to check on those spark plug wires to be sure they’re up to...
P0034 OBD-II Trouble Code: Turbocharger or Supercharger Bypass Valve Control Circuit Low
P0034 P0034 trouble code definition P0035 is the code for Turbocharger or Supercharger Bypass Valve Control Circuit Low What the P0034 code means Note that each manufacturer has a slightly different definition for this code as it is relative to...
Symptoms of a Bad or Failing Cabin Air Filter
Poor air flow and an unusual odor can indicate it's time to replace the cabin air filter.

Starting, only clicks

The first to do is to make sure the engine turns by putting a socket and breaker bar on the crankshaft pulley bolt and turning the motor. If the motor turns, then you know it is in the wiring. Follow...

Why does my interior lights flash on and off sometimes when I flip my dimmer switch?

Hello and thank you for contacting Your Mechanic. The dimmer switch has a connection for the dome light and controls the dash lights with using resistance. The problem is the dimmer switch contacts have corrosion inside them and have created...

dashboard lights won't turn on

Hi there: This issue is typically caused by a blown fuse in the fuse box located on the driver side of the vehicle. It could also be due to a bad electrical relay that powers these lights. To know for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com