Saturn LW300 Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Saturn LW300 Hazard / Turn Signal Flasher Replacement is $188 with $93 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Saturn LW300V6-3.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.87Shop/Dealer Price$358.59 - $506.25
2002 Saturn LW300V6-3.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$281.87Shop/Dealer Price$338.61 - $486.28
2003 Saturn LW300V6-3.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$281.87Shop/Dealer Price$338.61 - $486.28
Show example Saturn LW300 Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Chris

16 years of experience
122 reviews
Chris
16 years of experience
Saturn LW300 V6-3.0L - Car is not starting - North Hollywood, California
Very smart

Bryan

5 years of experience
64 reviews
Bryan
5 years of experience
Saturn LW300 V6-3.0L - Oil Change - Culver City, California
Came on time and stress free for me. Thanks

Lucas

10 years of experience
33 reviews
Lucas
10 years of experience
Saturn LW300 V6-3.0L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Gaithersburg, Maryland
Lucas was punctual, proficient, and professional. He answered all of my questions and gave me sound advice regarding a problem I have with another vehicle.

Theodore

16 years of experience
1592 reviews
Theodore
16 years of experience
Saturn LW300 V6-3.0L - Car is not starting - Bellevue, Washington
Knowledgeable. Spent time showing me the problem.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Saturn LW300 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in Oregon
The The Oregon Department of Transportation requires that all drivers carry liability insurance, or “financial responsibility,” on their vehicles in order to operate a vehicle legally on Oregon roadways, and to maintain legal vehicle registration. The minimum financial responsibility requirements...
Rules of the Road For Washington Drivers
Driving Driving in the state of Washington gives you a lot of great opportunities to see some of the country’s most beautiful natural sights. If you live in Washington or visiting and plan on doing any driving there, you should...
P0859 OBD-II Trouble Code: Traction Control Input Signal High
PO859 means that the PCM has reported a malfunction relating to the traction control input signal circuit due to a faulty control switch or sensor.

Oil leaking over two weeks

The engine may be leaking oil onto the undercarriage where you can't see it, but more likely, the engine is burning oil. This generally happens when either the valve guides or piston rings are worn. If there is too much...

Intake valve control solenoid

Hello - these 2 components mount on each cylinder head, and are partially visible at the "nose" (accessory belt end) of the engine. They use engine oil pressure to vary cam timing relative to the static cam/crankshaft timing relationship. Here...

Jerking reaction when accelerating

This may be a sign of a dirty or failing mass air flow sensor. The mass air flow sensor is a unit in the intake system that monitors air intake as it is mixed with fuel prior to being injected...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com