Saturn LS2 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(13)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(13)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Saturn LS2 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LS2V6-3.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Saturn LS2 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(13)

Rating Summary
10
3
0
0
0
10
3
0
0
0

Caster

28 years of experience
176 reviews
Caster
28 years of experience
Saturn LS2 V6-3.0L - Brake Light Bulb Replacement (Driver Side, Passenger Side) - Sonoma, California
Caster was early, prepared, and thorough. I feel like my car is in good hands!

Pete

16 years of experience
192 reviews
Pete
16 years of experience
Saturn LS2 V6-3.0L - Oil Change - El Cajon, California
On time and done quickly. Left the car and area clean.

Pete

16 years of experience
192 reviews
Pete
16 years of experience
Saturn LS2 V6-3.0L - Oil Change - El Cajon, California
As always on time professional and very knowledgeable and polite. Highly recommend.

Phillip

17 years of experience
85 reviews
Phillip
17 years of experience
Saturn LS2 V6-3.0L - Drive Belt Tensioner - San Antonio, Texas
Excellent Service: Phillip arrived on time as scheduled. He completed the work efficiently. The vehicle now operates much better than it did before the belt replacement. The work is documented. An itemized parts list is issued along with an electronic receipt. Excellent service. Thank you. CTomsen

Excellent Rating

(13)

Rating Summary
10
3
0
0
0
10
3
0
0
0
Number of Saturn LS2 services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

2005 Jeep Wrangler vs. 2005 Chevrolet Blazer: Which One Should I Buy?
Sport SUVs are a class all of their own; these vehicles are meant for a fun drive through the woods and across the trail – but not necessarily to Grandma’s house! Think instead about going through the creek and through...
How to Buy a Good Quality Power Steering Fluid Reservoir
Your Your vehicle runs smoothly while you’re driving down the road due to the power steering fluid, making it important to assure that the fluid doesn’t leak. Check your power steering fluid reservoir regularly for cracks and chips and leakage...
P0386 OBD-II Trouble Code: Crankshaft Position Sensor B Circuit Range Performance
P0386 means the crankshaft position sensor has produced excessive voltage that exceeds the manufacturer's specifications.

How do I turn on the headlights in a 2012 Dodge Ram?

You should always use your headlights when it is at all dark out. Headlights help you see better, help others see you, and are legally required. Turning on the headlights in your car is easy. Locate the headlight switch, which...

when starting the car once you press the gas pedal it does not respond right away .Also happened on the highway

Hello. I usually start by checking the computer for codes. I also use the scan tool to see what the sensor are reading. Most of the time this is caused by an airflow sensor that is not reading right or...

Car won't go in reverse - 2006 Chrysler Pacifica

Hi there, thanks for writing in. This is a known problem, and Chrysler has a recall (https://www.yourmechanic.com/article/what-to-do-if-your-car-is-recalled-by-jason-unrau) (06V432000) to correct it. Contact your Chrysler dealer as soon as possible to have this problem corrected.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com