Saturn Ion Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(260)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(260)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Saturn Ion Throttle Body Replacement is $373 with $233 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Saturn IonL4-2.2LService typeThrottle Body ReplacementEstimate$761.84Shop/Dealer Price$917.15 - $1374.98
2007 Saturn IonL4-2.2LService typeThrottle Body ReplacementEstimate$723.31Shop/Dealer Price$869.47 - $1303.84
2005 Saturn IonL4-2.2LService typeThrottle Body ReplacementEstimate$752.83Shop/Dealer Price$906.40 - $1362.92
2006 Saturn IonL4-2.0L TurboService typeThrottle Body ReplacementEstimate$611.07Shop/Dealer Price$729.20 - $1079.40
2006 Saturn IonL4-2.4LService typeThrottle Body ReplacementEstimate$823.31Shop/Dealer Price$995.97 - $1506.46
2005 Saturn IonL4-2.0L TurboService typeThrottle Body ReplacementEstimate$611.07Shop/Dealer Price$729.34 - $1079.65
2004 Saturn IonL4-2.0L TurboService typeThrottle Body ReplacementEstimate$611.07Shop/Dealer Price$729.21 - $1079.43
2003 Saturn IonL4-2.2LService typeThrottle Body ReplacementEstimate$664.05Shop/Dealer Price$795.42 - $1185.36
Show example Saturn Ion Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(260)

Rating Summary
240
9
2
3
6
240
9
2
3
6

Colby

13 years of experience
34 reviews
Colby
13 years of experience
Ion 2003 - Starter - Denver, CO
Very thorough and accurate work. Great recommendations for more service that may need to be done in the future. Fast and friendly.

Joshua

6 years of experience
35 reviews
Joshua
6 years of experience
Ion 2007 - Defroster is not working - Flower Mound, TX
Very knowledgeable and professional. He took the time to explain everything to me. Great service!

Benji

20 years of experience
206 reviews
Benji
20 years of experience
Ion 2005 - Evaporation Vent Solenoid - Chandler, AZ
Knowledgeable professional

Benji

20 years of experience
206 reviews
Benji
20 years of experience
Ion 2005 - Knock Sensor - Chandler, AZ
Knowledgeable professional

Excellent Rating

(260)

Rating Summary
240
9
2
3
6
240
9
2
3
6
Number of Saturn Ion services completed
2860+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

P2080 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circ Range/Perf Bank 1 Sensor 1
P2080 means there is a malfunction in the circuit bank 1 sensor 1, likely due to an electrical component problem.
P0425 OBD-II Trouble Code: Catalyst Temperature Sensor (Bank 1)
Trouble code P0425 means the PCM detects a lack of catalyst efficiency in the catalytic converter for engine bank 1.
The Guide to Right-of-Way Laws in Alaska
Traffic Traffic laws are founded in common sense, and are in place to ensure that traffic moves safely and smoothly. In Alaska, most accidents are due to failure to yield right of way when required by law. “Right-of-way” is the...

Isit normal for my car to shift between 2000 RPMs and 3000 rpms

Hello, thanks for writing in about your Chrysler Voyager. The shift RPMs will be higher if you are further down on the throttle on faster acceleration. Shifting between 2000 and 3000 is normal.

Fuel shutoff switch

According to the owner's manual for your vehicle, your "vehicle has a feature that may automatically unlock the doors, turn on the interior lamps, turn on the hazard warning flashers, and shut off the fuel system after the airbags inflate."...

Runs fine but doesn’t accelerate after I step on the break

Hi Dagoberto. Thanks for contacting us tonight. Sometimes issues like you've described are caused by a worn out torque converter, while in some instances, it's as simple as dirty transmission fluid or an inner seal leak. It can also be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com