Saab 9-5 Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(78)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(78)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Saab 9-5 Water Pump Replacement is $403 with $151 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Saab 9-5V6-2.8L TurboService typeWater Pump ReplacementEstimate$652.00Shop/Dealer Price$751.73 - $1036.34
2002 Saab 9-5L4-2.3L TurboService typeWater Pump ReplacementEstimate$682.02Shop/Dealer Price$779.73 - $1064.20
2004 Saab 9-5L4-2.3L TurboService typeWater Pump ReplacementEstimate$682.02Shop/Dealer Price$779.78 - $1064.29
2006 Saab 9-5L4-2.3L TurboService typeWater Pump ReplacementEstimate$682.02Shop/Dealer Price$779.78 - $1064.29
1999 Saab 9-5L4-2.3L TurboService typeWater Pump ReplacementEstimate$682.02Shop/Dealer Price$782.87 - $1069.70
2000 Saab 9-5V6-3.0L TurboService typeWater Pump ReplacementEstimate$607.58Shop/Dealer Price$687.03 - $915.92
2008 Saab 9-5L4-2.3L TurboService typeWater Pump ReplacementEstimate$682.02Shop/Dealer Price$779.81 - $1064.34
2007 Saab 9-5L4-2.3L TurboService typeWater Pump ReplacementEstimate$682.02Shop/Dealer Price$779.78 - $1064.29
Show example Saab 9-5 Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(78)

Rating Summary
76
0
0
1
1
76
0
0
1
1

Fakhar

5 years of experience
11 reviews
Fakhar
5 years of experience
9-5 2001 - Tune-up - Oakland, CA
Fakhar showed up on time, reviewed the order and the cost, and took care of the items requested. He made useful recommendations as well.

Fakhar

5 years of experience
11 reviews
Fakhar
5 years of experience
9-5 2001 - Air Filter - Oakland, CA
Fakhar showed up on time, reviewed the order and the cost, and took care of the items requested. He made useful recommendations as well.

Claud

6 years of experience
341 reviews
Claud
6 years of experience
9-5 2005 - Headlight Bulb - Detroit, MI
Awesome

Claud

6 years of experience
341 reviews
Claud
6 years of experience
9-5 2005 - Tail Lamp Bulb - Detroit, MI
Awesome

Excellent Rating

(78)

Rating Summary
76
0
0
1
1
76
0
0
1
1
Number of Saab 9-5 services completed
858+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

P2172 OBD-II Trouble Code: Throttle Actuator Control System - Sudden High Airflow Detected
P2172 P2172 code definition Throttle Actuator Control System - Sudden High Airflow Detected What the P2172 code means The P2172 code means that a large amount of airflow was suddenly inducted into the throttle actuator control system. The electronic control...
Michigan Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Michigan. Speed limits in Michigan 70 mph: many areas of urban and rural freeways and interstates (60 mph...
B1985 OBD-II Trouble Code: Seat Switch Lumbar Deflate Circuit Failure
B1985 means there the switch lumbar deflate circuit is bad. This is most likely due to a faulty circuitry in the part.

Parking Brake?

The rear parking brake shoes (https://www.yourmechanic.com/services/brake-shoes-rear-replacement) may be causing the clicking inside the new rotors. If the parking brakes are dragging a little. You may have rear brake pads or front brake pads moving inside the caliper bracket. It could...

Fluctuating oil pressure - 1980 Jeep CJ5

The fluctuating oil pressure indicates an inadequate oil supply (https://www.yourmechanic.com/services/oil-level-is-low-inspection) to the oil pump. It is possible that there may be some trash or sludge buildup on the pickup tube screen limiting the oil supply at the oil pump. An...

My check engine engine light is on and the computer (ECM) said it's a crank sensor problem.

Check the crankshaft position sensor and see if there is a loose wire or if the remote wiring is disabling the sensor. If the wiring is good and the sensor is hooked up properly, then I recommend replacing the crankshaft...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com