Saab 9-5 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(93)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(93)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Saab 9-5 Power Steering Pressure Hose Replacement is $348 with $194 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Saab 9-5V6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$946.24Shop/Dealer Price$1112.50 - $1595.08
2001 Saab 9-5L4-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$697.00Shop/Dealer Price$815.79 - $1165.56
2004 Saab 9-5L4-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$697.00Shop/Dealer Price$815.83 - $1165.63
2002 Saab 9-5L4-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$697.00Shop/Dealer Price$815.83 - $1165.63
2011 Saab 9-5L4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$900.95Shop/Dealer Price$1089.70 - $1647.72
2011 Saab 9-5V6-2.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$1105.34Shop/Dealer Price$1295.42 - $1854.44
2003 Saab 9-5L4-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$697.00Shop/Dealer Price$815.86 - $1165.67
2000 Saab 9-5V6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$928.22Shop/Dealer Price$1091.00 - $1570.96
Show example Saab 9-5 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(93)

Rating Summary
89
2
0
1
1
89
2
0
1
1

Ronald

30 years of experience
7 reviews
Ronald
30 years of experience
Saab 9-5 V6-3.0L Turbo - Brake Rotor/Disc Replacement (Front, Rear) - Cambridge, Massachusetts

Luis

10 years of experience
140 reviews
Luis
10 years of experience
Saab 9-5 L4-2.3L Turbo - Pre-purchase Car Inspection - Suffern, New York
Luis was prompt, very friendly and thorough in his communication, he offered advice and additional follow-up to his inspection, would definitely recommend him to others.

John

21 years of experience
650 reviews
John
21 years of experience
Saab 9-5 V6-3.0L Turbo - Crankshaft Position Sensor - Orlando, Florida
Courteous, professional, knowledgeable, would definitely recommend him for future service.

Chris

12 years of experience
83 reviews
Chris
12 years of experience
Saab 9-5 L4-2.3L Turbo - Coolant is leaking - Indianapolis, Indiana
Chris is a rockstar! He went above and beyond. Sobs are very hard to get materials for but Chris used his knowledge of cars and got my coolant hose to where it could work and work well. I will request Chris again!

Excellent Rating

(93)

Rating Summary
89
2
0
1
1
89
2
0
1
1
Number of Saab 9-5 services completed
1023+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

How to Get Chrysler Dealership Certified
Chrysler car dealerships offer automotive technician jobs to mechanics who are certified through the MOPAR CAP (Career Automotive Program).
The Guide to Legal Car Modifications in New Hampshire
ARENA Creative / Shutterstock.com Whether you live in New Hampshire or plan to move there in the near future, you need to understand the laws surrounding vehicle modification. Understanding the following regulations will ensure that your vehicle...
The Traveler’s Guide to Driving in New Zealand
New New Zealand has tons of things to see and do. It is the home of Middle Earth, as this is where Peter Jackson filmed some the most famous films in fantasy history. You can find plenty of wonderful attractions...

Front lower control arm bushings loose

Suspension parts wear over time. The style of your driving, as well as the condition of the local roads, can have a significant effect on the amount of time it takes to wear. The suspension is one big system; it...

my emissions service light is on and car stalls

Hi There, Your car has a small purge valve called a purge solenoid (https://www.yourmechanic.com/services/evaporation-vent-solenoid-replacement) that controls the venting of fumes from the fuel tank as these fumes build up inside, particularly when you are refueling the car with gas. The...

Cracked trans case on 2014 Ford escape se.

Hi Josh. Thanks for contacting us tonight. It must have been a pretty good hit to crack the CVT case - or hit at just the right spot. Assuming that the car is driving fine now, the only potential issues...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com