Saab 9-2X Car is hard to start Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(9)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(9)

Car is hard to start Inspection Service

How much does a Car is hard to start Inspection cost?

On average, the cost for a Saab 9-2X Car is hard to start Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Saab 9-2XH4-2.5L TurboService typeCar is hard to start InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Saab 9-2XH4-2.5LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Saab 9-2XH4-2.0L TurboService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Saab 9-2XH4-2.5LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Saab 9-2X Car is hard to start Inspection prices

A car that is hard to start can be a major inconvenience. While this is usually not a life threatening malfunction, it can make getting around much more difficult. There are a number of issues that will make a car hard to start. Everything from the electrical system to the fuel system to the actual starter itself can be the problem.

Finding the root cause of a hard starting engine can take some investigation. Ignoring a hard starting issue can further damage the vehicle, which will often result in a more expensive repair.

How this system works:

In order to get an engine running, it must be turned at speed so that it starts to suck fuel and air into the cylinders, and then compress and ignite this fuel/air mixture.

The starter motor is an electric motor that turns the engine to get it started. The starter motor has a small pinion gear wheel that engages with a larger gear ring at the rim of the engine flywheel.

The starter motor draws the electric current it needs to run from the battery. The starter needs a heavy current and to avoid sparking a solenoid is used. The ignition switch operates the starter motor. When the ignition is turned on, current is fed to the solenoid and into the starter motor. Once the car engine starts and the key is released, the starter motor turns off.

Common reasons for this to happen:

  • Bad Starter: Over time starter motors can wear out and start to malfunction. If this is the problem the starter will have to be replaced. If the car turns over, the problem is not the starter. If nothing happens when the key is turned the problem could be the starter, or if the car turns over very slowly and the dash lights dim while it is cranking, the starter could be the culprit.

  • Bad Relay Wiring: The wiring between the battery and starter can become loose or broken which will prevent the starter motor from functioning. The wiring will need to be replaced or repaired.

  • Low or Dead Battery: The starter motor needs voltage from the battery to operate. If the battery is low or failing it may not produce enough current for the starter motor to function. Charging or replacing the batter should resolve this problem.

It is also possible that the battery terminals have become corroded or loose. Cleaning and tightening the terminals and cables is recommended.

  • Failing Solenoid: A failing solenoid is a common issue with the starter system and if the solenoid is going bad, the car will be difficult to start. The starter will need to be inspected to determine if the problem is the starter motor itself or the solenoid. A failing solenoid will need to be replaced.

  • Failing Ignition Switch: Over time an ignition switch can start to fail and one of the most common symptoms is that the car is hard to start. If the ignition switch is hot to the touch this indicates an issue with the ignition switch wiring. A failing ignition switch will eventually stop working completely and will need to be replaced.

  • Defective Fuel Pump: If the engine is not getting enough fuel, it will be hard, if not impossible to start. The fuel pump is responsible for pulling gas from the tank to the injectors and if it is not delivering enough fuel the car will be difficult to start and eventually will not start at all.

  • Fouled Plugs: Spark plugs create the spark which allows the vehicle to burn fuel. Fouled plugs are one of the most common reasons for a hard starting engine. As electrodes wear down, the voltage required to jump the gap to ignite the fuel increases. This can lead to prolonged cranking before the engine will start.

  • Clogged Fuel Filter: A fuel filter that is clogged can make a vehicle very difficult to start. The fuel filter screens out contaminants and can become clogged over time. This will prevent the injectors from getting enough fuel, making the car hard to start.

  • Contaminated Fuel: Fuel that has too much alcohol or water in it will result in a car that is difficult and often impossible to start. Even if it does start, contaminated fuel can do serious damage to the engine. If contaminated fuel is suspected, have the vehicle inspected immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the hard to start issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The starter, battery, connecting wiring and other important components will be inspected by the mechanic. This may include the vehicle's fuel pump, fuel filter, spark plugs, ignition and more. It may be necessary for the mechanic to crank up the car to verify the problem and issue an accurate diagnosis.

How important is this service?

If a car is hard to start, it's indicative of a major condition preventing normal operation and if left unattended it may lead to the car not starting at all. The vehicle should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(9)

Rating Summary
8
1
0
0
0
8
1
0
0
0

Larry

19 years of experience
116 reviews
Larry
19 years of experience
Saab 9-2X H4-2.5L - Smell in the car - Oakland, California
Professional and helpful! Really appreciated that he was so willing to talk through the details.

Nathaniel

16 years of experience
101 reviews
Nathaniel
16 years of experience
Saab 9-2X H4-2.0L Turbo - Car is not starting - Palmetto, Georgia

Chris

20 years of experience
448 reviews
Chris
20 years of experience
Saab 9-2X H4-2.5L - Pre-purchase Car Inspection - Battle Ground, Washington
Answered all of my questions.

Mark

11 years of experience
349 reviews
Mark
11 years of experience
Saab 9-2X H4-2.5L - Brake Pads Replacement (Front, Rear) - Fremont, California

Excellent Rating

(9)

Rating Summary
8
1
0
0
0
8
1
0
0
0
Number of Saab 9-2X services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

What Causes Fuel Injectors to Get Clogged or Dirty?
Fuel injectors deliver fuel into the cylinder for combustion. Clogged fuel injectors can be caused by debris or impurities in the fuel.
How Long Does a Wiper Gearbox Last?
Having Having fully functional wipers is an essential part of getting around on the roadways safely. The wipers on a car can only work if a variety of different parts work together. The wiper gearbox is what helps to provide...
P0059 OBD-II Trouble Code: Heater Circuit Resistance (Bank 2 Sensor 1)
P0059 P0059 trouble code definition The definition of diagnostic trouble code p0059 is that the resistance for the heater circuit of bank 2 sensor 1 oxygen sensor is not correct. What the P0059 code means When this trouble code sets...

Steering wheel hard to turn after alternator replacement

Have the system scanned to see what is causing the light to turn on first. The low voltage conditions might have caused the problem and would need diagnosis of the code to fix the issue. Your power steering pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-power-steering-pump)...

On interstate, after 15-20 seconds car loses acceleration

Hello. Thanks for writing in about your 2007 BMW 335xi. It sounds like the thermostat may be sticking. The thermostat needs to be checked and the cooling system needs to be checked to make sure that the coolant is flowing...

My car takes a while to get to 35moh but once it reaches that it's fine what is wrong with my car

Hi Harlie. Thanks for contacting us today. In some cases, an acceleration problem accompanied by a knocking sound might be caused by low engine oil levels, loose cylinder head lifters or perhaps an engine misfire. This might also be the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com