Ram ProMaster 3500 Car is hard to start Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Car is hard to start Inspection Service

How much does a Car is hard to start Inspection cost?

On average, the cost for a Ram ProMaster 3500 Car is hard to start Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Ram ProMaster 3500V6-3.6LService typeCar is hard to start InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Ram ProMaster 3500V6-3.6LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Ram ProMaster 3500V6-3.6LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Ram ProMaster 3500V6-3.6LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2014 Ram ProMaster 3500L4-3.0L Turbo DieselService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2018 Ram ProMaster 3500L4-3.0L Turbo DieselService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Ram ProMaster 3500L4-3.0L Turbo DieselService typeCar is hard to start InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2016 Ram ProMaster 3500V6-3.6LService typeCar is hard to start InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ram ProMaster 3500 Car is hard to start Inspection prices

A car that is hard to start can be a major inconvenience. While this is usually not a life threatening malfunction, it can make getting around much more difficult. There are a number of issues that will make a car hard to start. Everything from the electrical system to the fuel system to the actual starter itself can be the problem.

Finding the root cause of a hard starting engine can take some investigation. Ignoring a hard starting issue can further damage the vehicle, which will often result in a more expensive repair.

How this system works:

In order to get an engine running, it must be turned at speed so that it starts to suck fuel and air into the cylinders, and then compress and ignite this fuel/air mixture.

The starter motor is an electric motor that turns the engine to get it started. The starter motor has a small pinion gear wheel that engages with a larger gear ring at the rim of the engine flywheel.

The starter motor draws the electric current it needs to run from the battery. The starter needs a heavy current and to avoid sparking a solenoid is used. The ignition switch operates the starter motor. When the ignition is turned on, current is fed to the solenoid and into the starter motor. Once the car engine starts and the key is released, the starter motor turns off.

Common reasons for this to happen:

  • Bad Starter: Over time starter motors can wear out and start to malfunction. If this is the problem the starter will have to be replaced. If the car turns over, the problem is not the starter. If nothing happens when the key is turned the problem could be the starter, or if the car turns over very slowly and the dash lights dim while it is cranking, the starter could be the culprit.

  • Bad Relay Wiring: The wiring between the battery and starter can become loose or broken which will prevent the starter motor from functioning. The wiring will need to be replaced or repaired.

  • Low or Dead Battery: The starter motor needs voltage from the battery to operate. If the battery is low or failing it may not produce enough current for the starter motor to function. Charging or replacing the batter should resolve this problem.

It is also possible that the battery terminals have become corroded or loose. Cleaning and tightening the terminals and cables is recommended.

  • Failing Solenoid: A failing solenoid is a common issue with the starter system and if the solenoid is going bad, the car will be difficult to start. The starter will need to be inspected to determine if the problem is the starter motor itself or the solenoid. A failing solenoid will need to be replaced.

  • Failing Ignition Switch: Over time an ignition switch can start to fail and one of the most common symptoms is that the car is hard to start. If the ignition switch is hot to the touch this indicates an issue with the ignition switch wiring. A failing ignition switch will eventually stop working completely and will need to be replaced.

  • Defective Fuel Pump: If the engine is not getting enough fuel, it will be hard, if not impossible to start. The fuel pump is responsible for pulling gas from the tank to the injectors and if it is not delivering enough fuel the car will be difficult to start and eventually will not start at all.

  • Fouled Plugs: Spark plugs create the spark which allows the vehicle to burn fuel. Fouled plugs are one of the most common reasons for a hard starting engine. As electrodes wear down, the voltage required to jump the gap to ignite the fuel increases. This can lead to prolonged cranking before the engine will start.

  • Clogged Fuel Filter: A fuel filter that is clogged can make a vehicle very difficult to start. The fuel filter screens out contaminants and can become clogged over time. This will prevent the injectors from getting enough fuel, making the car hard to start.

  • Contaminated Fuel: Fuel that has too much alcohol or water in it will result in a car that is difficult and often impossible to start. Even if it does start, contaminated fuel can do serious damage to the engine. If contaminated fuel is suspected, have the vehicle inspected immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the hard to start issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The starter, battery, connecting wiring and other important components will be inspected by the mechanic. This may include the vehicle's fuel pump, fuel filter, spark plugs, ignition and more. It may be necessary for the mechanic to crank up the car to verify the problem and issue an accurate diagnosis.

How important is this service?

If a car is hard to start, it's indicative of a major condition preventing normal operation and if left unattended it may lead to the car not starting at all. The vehicle should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Andrew

15 years of experience
510 reviews
Andrew
15 years of experience
Ram ProMaster 3500 V6-3.6L - Oil Change - La Center, Washington
Good job,

Pierre

9 years of experience
310 reviews
Pierre
9 years of experience
Ram ProMaster 3500 V6-3.6L - Car Starter Repair - Quincy, Massachusetts
Pierre was communicative, transparent, and committed to finding answers to my problem. Even though he was not able to fix the problem, I had more information to bring to a mechanic than ever before and am more informed about where the problem is coming from. Highly recommend!

Stephen

32 years of experience
179 reviews
Stephen
32 years of experience
Ram ProMaster 3500 L4-3.0L Turbo Diesel - Car does not move when I step on the gas pedal Inspection - Denver, Colorado
arrived on time and was very complete

Daniel

11 years of experience
228 reviews
Daniel
11 years of experience
Ram ProMaster 3500 L4-3.0L Turbo Diesel - Clunking or knocking noise from wheels Inspection - Chicago, Illinois
Very kind and honest.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Ram ProMaster 3500 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Fuse Box
If there are bare wires, loose fuses, or broken wires in the fuse box or the fuses are burning out faster, you may need to replace the fuse box.
How to Transfer a Car Title in Mississippi
Because Because a car title proves ownership of the vehicle, it is essential that the title be transferred whenever ownership changes. If you’re buying a car from a private seller in Mississippi, you’ll need to transfer the title to your...
P0703 OBD-II Trouble Code: Torque Converter/Brake Switch B Circuit Malfunction
P0703 Code means the PCM has registered a fault in the brake switch B circuit due to failed brake lamp switch, faulty fuse or socket

I recently replaced the radiator and thermostat and bled the lines now my car is overheating and I'm trying to find out if it's th

You should be able see the fluid circulating with the cap off. Begin with a cool engine, take the cap off and allow the engine to warm up to normal temperature. When the thermostat opens, you should be able to...

Car is having temperature issues - 2003 Nissan Altima

Hi there. From the description you have given, your vehicle's heater not working is not the only problem that needs to be addressed. Chances are the sealer could have plugged the heater core. A cooling system flush (https://www.yourmechanic.com/services/cooling-system-flush) could correct...

Oil pressure drops too low and then when I start the drive it goes back up to normal 2002 Mercury Mountaineer

Hello - low oil pressure (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-the-oil-light-on) at a hot idle is a normal indicator of worn engine bearings in a high-mileage engine. Since the oil light turns off when you accelerate indicates the oil pump is pumping more than 5...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com