Ram ProMaster 2500 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Ram ProMaster 2500 Throttle Body Replacement is $452 with $312 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Ram ProMaster 2500L4-3.0L Turbo DieselService typeThrottle Body ReplacementEstimate$1015.50Shop/Dealer Price$1234.23 - $1882.30
2017 Ram ProMaster 2500V6-3.6LService typeThrottle Body ReplacementEstimate$769.99Shop/Dealer Price$927.82 - $1397.20
2014 Ram ProMaster 2500L4-3.0L Turbo DieselService typeThrottle Body ReplacementEstimate$1006.49Shop/Dealer Price$1223.47 - $1870.24
2016 Ram ProMaster 2500L4-3.0L Turbo DieselService typeThrottle Body ReplacementEstimate$1006.49Shop/Dealer Price$1223.47 - $1870.24
2016 Ram ProMaster 2500V6-3.6LService typeThrottle Body ReplacementEstimate$769.99Shop/Dealer Price$929.32 - $1399.82
2015 Ram ProMaster 2500L4-3.0L Turbo DieselService typeThrottle Body ReplacementEstimate$1006.49Shop/Dealer Price$1223.61 - $1870.49
2015 Ram ProMaster 2500V6-3.6LService typeThrottle Body ReplacementEstimate$769.99Shop/Dealer Price$927.86 - $1397.27
2014 Ram ProMaster 2500V6-3.6LService typeThrottle Body ReplacementEstimate$769.99Shop/Dealer Price$927.85 - $1397.24
Show example Ram ProMaster 2500 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Brian

24 years of experience
818 reviews
Brian
24 years of experience
Ram ProMaster 2500 L4-3.0L Turbo Diesel - Strut Assembly Replacement (Front) - Fernandina Beach, Florida
I was hesitant to book through YourMechanic because I knew nothing about it prior to finding it through an internet search, were the reviews even real? Well this review is real because I took a chance and Booked Brian based on his very good reviews. I have a RAM Promaster 2500 Diesel commercial van that has challenged even the RAM dealerships that I have previously used for service. The strut installation required removing parts of the dash in order to access bolts at the top of the strut assemblies. My initial skepticism of Brian and YourMechanic led my to download detailed instructions about how to remove the dash assemblies. When asked, Brian indicated that he didn't need the instructions. I let him continue, fully expecting him to eventually ask for the directions for this unique installation. Before I knew it, Brian had neatly removed the necessary parts that allowed him to access the required bolts; Brian's method was actually more effective than the method in my downloaded instructions. Brian did such a great job on my suspension that I booked him for the rest of the day to replace my rear brakes. My wife's car was also making noises and Brian diagnosed the issue very quickly. Finding a reliable and knowledgeable mechanic can be difficult. I've now found one in Brian and will continue to use Brian as needed in the future. In fact I plan to book him soon to service our other vehicle. I highly recommend Brian.

Collins

13 years of experience
678 reviews
Collins
13 years of experience
Ram ProMaster 2500 V6-3.6L - Brake System Inspection - Atlanta, Georgia
This mechanic arrived right on time and gave me great advice about my vehicle after inspection. Was very kind, thoughtful and knowledgable. Thank you so much Collins.

Torrieanto

13 years of experience
632 reviews
Torrieanto
13 years of experience
Ram ProMaster 2500 V6-3.6L - Car Battery Replacement - Largo, Florida
Fast, efficient and personable.

Gustavo

16 years of experience
103 reviews
Gustavo
16 years of experience
Ram ProMaster 2500 V6-3.6L - Car is making a noise - Pompton Plains, New Jersey
Quick diagnosis

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Ram ProMaster 2500 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

P0119 OBD-II Trouble Code: ECT Sensor Circuit Intermittent Malfunction Problem
P0119 P0119 code definition Engine Coolant Temperature (ECT) sensor circuit intermittent malfunction problem. What the P0119 code means P0119 is the generic OBD-II code which indicates that the Engine Control Module (ECM) has detected intermittent ECT sensor input. What causes...
What Is E85 Ethanol?
E85 E85 ethanol is a fuel that can be used to power internal-combustion engines. Some vehicles can use E85 and gasoline, while others are tuned for E85 only. E85 is named as such because it is 85% alcohol. The other...
How to Prep an Engine Block for Paint
When When you are rebuilding an engine (https://www.yourmechanic.com/article/how-a-modern-engine-works), you’ll probably want to paint the engine block. It serves a few purposes including being clean and attractive in appearance, protecting from corrosion and rust, and offering a custom look, even matched...

This morning Engine Light, Traction Control Light, and Electronic steering light is on.

Hi there. The "good driver" light will not come on if there is a fault detected in the engine controls system; the other lights can accompany the check engine light as well, but there may be an additional cause for...

Camshaft chain placement?

Hi there. Turn the engine over by hand until the timing marks are aligned up. If they are facing up and the lobes are slightly facing down, then turn the timing chain a little bit until one of the camshaft...

I have 99 mercury cougar the problem is after 10 min I drive the car kick on the cooling fan N keep on all the time i replaced temp cooling sensor still on

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com