Ram ProMaster 2500 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Ram ProMaster 2500 Power Steering Pump Replacement is $797 with $517 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Ram ProMaster 2500V6-3.6LService typePower Steering Pump ReplacementEstimate$1343.12Shop/Dealer Price$1608.60 - $2388.84
2017 Ram ProMaster 2500V6-3.6LService typePower Steering Pump ReplacementEstimate$1325.10Shop/Dealer Price$1587.05 - $2364.64
2016 Ram ProMaster 2500V6-3.6LService typePower Steering Pump ReplacementEstimate$1325.10Shop/Dealer Price$1587.10 - $2364.73
2015 Ram ProMaster 2500L4-3.0L Turbo DieselService typePower Steering Pump ReplacementEstimate$1325.10Shop/Dealer Price$1587.10 - $2364.72
2014 Ram ProMaster 2500V6-3.6LService typePower Steering Pump ReplacementEstimate$1325.10Shop/Dealer Price$1590.04 - $2369.88
2016 Ram ProMaster 2500L4-3.0L Turbo DieselService typePower Steering Pump ReplacementEstimate$1325.10Shop/Dealer Price$1587.38 - $2365.21
2017 Ram ProMaster 2500L4-3.0L Turbo DieselService typePower Steering Pump ReplacementEstimate$1325.10Shop/Dealer Price$1587.13 - $2364.78
2014 Ram ProMaster 2500L4-3.0L Turbo DieselService typePower Steering Pump ReplacementEstimate$1325.10Shop/Dealer Price$1587.10 - $2364.72
Show example Ram ProMaster 2500 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

David

11 years of experience
193 reviews
David
11 years of experience
Ram ProMaster 2500 V6-3.6L - Alternator - Mount Laurel, New Jersey
david is awesome , fixed my problem with alternator, friendly and professional

Jonathan

36 years of experience
522 reviews
Jonathan
36 years of experience
Ram ProMaster 2500 V6-3.6L - Brake Pads Replacement (Front) - Tampa, Florida
On time / early, done well within expectations and as far as I can tell did a great job at the task to replace the brake pads. Provided insight on other issues and was upbeat about getting it done. Made for a most welcome experience with YourMechanic.

Andrew,

6 years of experience
161 reviews
Andrew,
6 years of experience
Ram ProMaster 2500 V6-3.6L - Pre-purchase Car Inspection - Arlington, Texas
Joaquin Andrew is an amazing mechanic. We would’ve been in a world of problems that was allegedly “under warranty” had Joaquin not checked our vehicles. He is extremely knowledgeable and a really nice, trustworthy guy. We can not thank him enough for his inspections and will definitely recommend him to others. Do not purchase a car first without him checking it first.

Joseph

14 years of experience
62 reviews
Joseph
14 years of experience
Ram ProMaster 2500 V6-3.6L - Battery - Lacey, Washington
Awesome friendly service thank you!!!

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Ram ProMaster 2500 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

How to Check and Add Fluid to an Automatic Transmission Car
Checking and keeping your transmission filled with a good level of fluid will help give you a seamless experience when driving.
P0629 OBD-II Trouble Code: Fuel Pump "A" Control Circuit High
P0629 means there is an issue with the "A" control circuit in the fuel pump often due too bad connectors/wires or a defective CAN bus.
How to Renew Your Car Registration in Kansas
Driving Driving on the roadways of Kansas is something that residents of this great state do on a daily basis. For the privilege of driving on these roadways, a resident will have to pay their fair share of taxes. Among...

overheating at idle with new clutch fan

Inspect and verify that there is no plastic bag/trash on front of condenser or up between the radiator and condenser. Plastic ductwork around the fan are all present and intact. You should also consider whether the fan clutch an OEM...

When trying to start the 2013 JX35 I pressed the brakes and push the start button and everything turn off even the inside light. W

It sounds like you're having an issue with the push button start system. It is possible that the issue could be caused by the push button itself. I would recommend having this particular system inspected by a qualified professional in...

Central locking not working Nissan k13. Key fob is ok

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com