Ram ProMaster 2500 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Ram ProMaster 2500 Control Arm Assembly Replacement is $433 with $293 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Ram ProMaster 2500V6-3.6LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1065.14Shop/Dealer Price$1296.28 - $1981.58
2018 Ram ProMaster 2500V6-3.6LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1085.33Shop/Dealer Price$1315.06 - $1999.32
2015 Ram ProMaster 2500V6-3.6LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1056.13Shop/Dealer Price$1285.52 - $1969.52
2016 Ram ProMaster 2500L4-3.0L Turbo DieselService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1056.13Shop/Dealer Price$1285.52 - $1969.52
2016 Ram ProMaster 2500L4-3.0L Turbo DieselService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1056.13Shop/Dealer Price$1287.00 - $1972.10
2014 Ram ProMaster 2500L4-3.0L Turbo DieselService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$730.99Shop/Dealer Price$879.24 - $1319.49
2014 Ram ProMaster 2500L4-3.0L Turbo DieselService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1056.13Shop/Dealer Price$1285.54 - $1969.55
2017 Ram ProMaster 2500V6-3.6LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1056.13Shop/Dealer Price$1285.52 - $1969.52
Show example Ram ProMaster 2500 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Ram ProMaster 2500 V6-3.6L - Brake Pads Replacement (Front, Rear) - East Rutherford, New Jersey
Arrived early. Attila explained what he was going to do clearly, called when finished to discuss work and recommendations.

David

11 years of experience
193 reviews
David
11 years of experience
Ram ProMaster 2500 V6-3.6L - Alternator - Mount Laurel, New Jersey
david is awesome , fixed my problem with alternator, friendly and professional

Joseph

14 years of experience
62 reviews
Joseph
14 years of experience
Ram ProMaster 2500 V6-3.6L - Battery - Lacey, Washington
Awesome friendly service thank you!!!

Torrieanto

13 years of experience
632 reviews
Torrieanto
13 years of experience
Ram ProMaster 2500 V6-3.6L - Car Battery Replacement - Largo, Florida
Fast, efficient and personable.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Ram ProMaster 2500 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

A Mechanic's Guide to Automotive Education
Alternative fuel, geographic information systems, and new welding techniques are important technologies automotive mechanics need to know.
How to Buy a Good Quality Steering Wheel Cover
A A steering wheel cover is something that you can slip over your steering wheel to personalize the look of your vehicle, add extra grip, make for a more comfortable grip, and to protect your steering wheel from damage. Here...
4 Essential Things to Know About Waxing and Polishing Your Car
Waxing Waxing and polishing your car are some of the most cost-effective updates that you can make to your vehicle, as well as the least time-consuming. While waxing and polishing your car correctly can take an afternoon, the beautiful finish...

Vibration

This sounds like you may have a worn engine (https://www.yourmechanic.com/services/engine-mount-replacement) or transmission mount. I would visually inspect each mount and check for wear or cracks in the rubber bushings. Over time, a worn or cracked bushing may not absorb the...

Getting knocking sound when engine is idling from the floor front and side of the engine

Hello, thank you for writing in. The knocking is going to sound worse at idle because the number of combustion cycles happening is less than when you are accelerating or maintaining a higher RPM. With that being said, engine knock...

Car struggles to start, idles very low after startup.

This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, making turns (which makes use of the power steering pressure switch) turning on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com