Porsche 944 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Porsche 944 Fuel Injector Replacement is $1168 with $1014 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Porsche 944L4-3.0LService typeFuel Injector ReplacementEstimate$3254.28Shop/Dealer Price$4035.13 - $6355.39
1991 Porsche 944L4-3.0LService typeFuel Injector ReplacementEstimate$2197.25Shop/Dealer Price$2711.46 - $4242.73
Show example Porsche 944 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Porsche mechanics

Real customer reviews from Porsche owners like you.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Porsche 944 L4-2.5L - Starter - Woods Cross, Utah
Joseph was great. He was knowledgeable about my Porsche which is not common with general mechanics due to its age. He is professional, was on time and advised me about some other items and tips about my car.

Joe

21 years of experience
126 reviews
Joe
21 years of experience
Porsche 944 L4-2.5L - Horn - Chicago, Illinois
Once again, a quality repair done by Joe.

Claud

9 years of experience
640 reviews
Claud
9 years of experience
Porsche 944 L4-3.0L - Clutch Slave Cylinder - Grosse Pointe, Michigan
Great work on my classic Porsche

Arturo

28 years of experience
303 reviews
Arturo
28 years of experience
Porsche 944 L4-2.5L - Car is not starting - San Diego, California
Knew what he was doing, great to talk to, and told me what my next steps should be as far as engine work. He's a great mechanic. One I could see myself calling time and time again.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1
Number of Porsche 944 services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Porsche MECHANICS
300+
experts on our platform

Recent articles & questions

P0206 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 6
P0206 code definition Injector Circuit Malfunction - Cylinder 6 What the P0206 code means When a P0206 code is seen, the Engine...
The Guide to Legal Car Modifications in Michigan
ARENA Creative / Shutterstock.com If you live in Michigan or are planning on moving to the area, you need to know about the vehicle modification laws in the state. Following these modification regulations will help ensure that...
How Long Does a Flex Coupling Steering Damper Last?
There There are a number of different components used in your vehicle to help control the amount of vibration you and your passengers feel as you're driving. One of those is the flex coupling-steering damper. Specifically this part tones down...

How do I unlock the doors with the wireless remote control?

Your vehicle can be unlocked with the wireless remote control system, so that you don’t have to use a key. To unlock the doors, press the unlock button (an image of an opened padlock) on your wireless remote control, while...

No power to the radio

Hi there. If you are looking to install an aftermarket radio or complete any work on your 1998 Malibu, it would be a good idea to buy a car repair and service manual for your vehicle. This will give you...

Engine noise

There is a few tests that should be done for the engine noise and the first is to find out what cylinder is not working and doing a compression test to see if the noise is a stuck open valve...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com