Porsche 944 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Porsche 944 Brake Master Cylinder Replacement is $484 with $344 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Porsche 944L4-3.0LService typeBrake Master Cylinder ReplacementEstimate$1572.16Shop/Dealer Price$1935.45 - $3005.07
1990 Porsche 944L4-3.0LService typeBrake Master Cylinder ReplacementEstimate$1293.69Shop/Dealer Price$1585.20 - $2449.41
Show example Porsche 944 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Porsche mechanics

Real customer reviews from Porsche owners like you.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1

David

11 years of experience
199 reviews
David
11 years of experience
Porsche 944 L4-2.5L - Pre-purchase Car Inspection - Orlando, Florida
Very straight forward and very informative.

Arturo

28 years of experience
303 reviews
Arturo
28 years of experience
Porsche 944 L4-2.5L - Car is not starting - San Diego, California
Knew what he was doing, great to talk to, and told me what my next steps should be as far as engine work. He's a great mechanic. One I could see myself calling time and time again.

Patrick

33 years of experience
369 reviews
Patrick
33 years of experience
Porsche 944 L4-2.5L - Oil Change - Henderson, Nevada

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Porsche 944 L4-2.5L - Fuel Filter Replacement - Cumming, Georgia
Dan was great. He showed up early, and did a great job. He was really knowledgeable about old Porsche's and was super friendly.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1
Number of Porsche 944 services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Porsche MECHANICS
300+
experts on our platform

Recent articles & questions

How to Obtain an L3 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get study guides & practice tests for L3 Light Duty Hybrid/Electric Vehicle Specialists.
How to Get a New Jersey Driver's Permit
New New Jersey uses a graduated driver’s license program, like many other states. This program requires all new drivers under 18 years old to begin driving under supervision, in order to practice safe driving before getting their full driver’s license....
How to Remove the Smell of Mold From Your Car
Chances Chances are, from the commute to work to leisurely weekend drives, you spend a good deal of time inside your automobile. Until offensive odors creep in, you may even take for granted that those driving times are generally odor-free....

What kind of oil should I use?

You should use SAE 5W-20 engine oil.

Linkage not working correctly

The problem most likely lies in either the shifter assembly or the linkage rod has become disconnected. The shifter and linkage rod need to be inspected for failure. You may want to enlist the help of a mechanic, such as...

Car won't start after removing sysLOCATE device

The SysLocate GPS system was designed to track the location and the speed of the vehicle it was installed in. If the device's power supply was being pulled from the wrong power source or if it wasn't uninstalled correctly, this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com