Porsche 718 Boxster Car Battery Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Porsche 718 Boxster Car Battery Replacement is $349 with $209 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2022 Porsche 718 BoxsterH4-2.0L Turbo	Service typeCar Battery Replacement	Estimate$793.75	Shop/Dealer Price$948.25 - $1401.63
2022 Porsche 718 BoxsterH4-2.5L Turbo	Service typeCar Battery Replacement	Estimate$782.49	Shop/Dealer Price$934.78 - $1386.50
2021 Porsche 718 BoxsterH4-2.5L Turbo	Service typeCar Battery Replacement	Estimate$670.99	Shop/Dealer Price$804.10 - $1199.24
2017 Porsche 718 BoxsterH4-2.0L Turbo	Service typeCar Battery Replacement	Estimate$715.15	Shop/Dealer Price$859.30 - $1287.56
2017 Porsche 718 BoxsterH4-2.5L Turbo	Service typeCar Battery Replacement	Estimate$715.15	Shop/Dealer Price$860.77 - $1290.14
2019 Porsche 718 BoxsterH4-2.0L Turbo	Service typeCar Battery Replacement	Estimate$692.21	Shop/Dealer Price$830.76 - $1241.93
2023 Porsche 718 BoxsterH4-2.0L Turbo	Service typeCar Battery Replacement	Estimate$782.49	Shop/Dealer Price$934.83 - $1386.59
2023 Porsche 718 BoxsterH6-4.0L	Service typeCar Battery Replacement	Estimate$782.49	Shop/Dealer Price$934.81 - $1386.55

Show example Porsche 718 Boxster Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Porsche mechanics

Real customer reviews from Porsche owners like you.

Excellent Rating

(68)

Rating Summary

66

1

0

0

1

66

1

0

0

1

SEE REVIEWS NEAR ME

Rodney

37 years of experience

611 reviews

Rodney

37 years of experience

by THOMAS

Porsche 718 Boxster H4-2.5L Turbo - Oil Change - Rancho Cordova, California

Rodney was knowledgeable and professional! Changed the oil in my 2019 Porsche (which is not an easy task.) I am already recommending him to others.

Oaan

6 years of experience

3 reviews

Oaan

6 years of experience

by Howard

Porsche 718 Boxster H4-2.0L Turbo - Oil Change - Old Westbury, New York

Oaan was thorough and did a terrific job with my car- virtually all maintenance on this car is a bit of a pain due to the mid-engine location with tricky access to everything. Was pleased to have the work done professionally in such a convenient manner.

Phillip

32 years of experience

22 reviews

Request Phillip

Phillip

32 years of experience

Request Phillip

by Seth

Porsche Cayenne V8-4.8L - Battery - El Dorado Hills, California

Phillip was great! Had all the tools and got the job done quickly!

Yoel

10 years of experience

212 reviews

Yoel

10 years of experience

by Michael

Porsche Cayenne V8-4.8L Turbo - Battery - Glenside, Pennsylvania

Thanks for Quick and thorough change of complicated Porsche Cayenne battery

Excellent Rating

(68)

Rating Summary

66

1

0

0

1

66

1

0

0

1

SEE REVIEWS NEAR ME

Recent articles & questions

P0593 OBD-II Trouble Code: Cruise Control Multi-Function Input “B” Circuit High

P0593 means an error with the cruise control multi-function input B circuit, often caused by a interior spill that damages the cruise control switch.

What Are Rocker Switches and How Are They Used in Cars?

Every Every function inside your vehicle is controlled by a switch in some way. Some switches require a high current capacity, while others are low voltage. Low voltage switches usually control the electrical position of a relay, which directs a...

How to Transfer a Car Title in Oregon

The The state of Oregon requires that all vehicles have a title, and that the title show the name of the current owner. When a car is bought or sold, the title must be updated to reflect the new owner’s...

Timing kit squealing after new one was installed

It sounds like something might have been misaligned or not installed correctly during the previous service. I would recommend retracing your steps to see if any steps were not done properly or if any steps were missed. I would go...

Tire blow out and it ripped the wire harness. I replaced the harness and spliced wires but it won't turn over

Check the wiring to what it went to. If the wiring went to a sensor, then check the sensor to see if it was damaged. If the engine is not starting, then the crankshaft sensor could have been damaged. If...

Can i put a transmission from a 99 honda civic into a 98 honda accord?

The 1999 Civic transmission has a Tag ID (stamped on the transmission) of B4RA. The Tag ID for the transmission used on the 1998 Accord with the V-6 is either B7XA or B7XA-1. Inasmuch as these transmissions are electronically controlled,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com