Pontiac Tempest Brake Drum Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Pontiac Tempest Brake Drum Replacement is $417 with $199 for parts and $218 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1968 Pontiac TempestV8-6.6L	Service typeBrake Drum Replacement	Estimate$696.15	Shop/Dealer Price$821.45 - $1138.84
1967 Pontiac TempestL6-3.8L	Service typeBrake Drum Replacement	Estimate$644.15	Shop/Dealer Price$769.50 - $1086.92
1963 Pontiac TempestL4-3.2L	Service typeBrake Drum Replacement	Estimate$644.15	Shop/Dealer Price$769.49 - $1086.91
1969 Pontiac TempestV8-6.6L	Service typeBrake Drum Replacement	Estimate$644.15	Shop/Dealer Price$769.44 - $1086.81
1991 Pontiac TempestL4-2.2L	Service typeBrake Drum Replacement	Estimate$618.62	Shop/Dealer Price$741.73 - $1059.14
1990 Pontiac TempestV6-3.1L	Service typeBrake Drum Replacement	Estimate$618.62	Shop/Dealer Price$741.69 - $1059.08
1969 Pontiac TempestV8-5.7L	Service typeBrake Drum Replacement	Estimate$657.15	Shop/Dealer Price$782.14 - $1099.30
1970 Pontiac TempestV8-5.7L	Service typeBrake Drum Replacement	Estimate$657.15	Shop/Dealer Price$783.11 - $1100.99

Show example Pontiac Tempest Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

Raise the vehicle and safely support it using steel jack stands.
Remove tire and wheel assembly.
Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(4)

Rating Summary

3

0

1

0

0

3

0

1

0

0

SEE REVIEWS NEAR ME

H

26 years of experience

828 reviews

H

26 years of experience

by John

Pontiac Tempest L6-3.8L - Brakes, Steering and Suspension Inspection - Los Altos, California

On time. A true gentleman. Skilled with cars that date over many years. He knows older cars including many classics. Younger mechanics probably would know know a thing about a 4BBL Carburetor. One can see that he has a true love of cars & the work he does. This is only one experience so I would hope to see him back when needed.

Chris

22 years of experience

2252 reviews

Chris

22 years of experience

by Harald

Pontiac Tempest V8-5.3L - Pre-purchase Car Inspection - Laguna Niguel, California

Chris did a great job inspecting the vehicle, I live in GA and wanted to purchase a car in CA so I needed an unbiased third party to look at it for me. My primary concern was that the car was represented accurately in the online ad (there are a lot of scams online now), which he did, we had a great conversation after the inspection which did a lot to comfort my concerns. This was a "project" car and needed to be evaluated accordingly, it was something that I had planned on doing a restoration on so I knew it needed some work. My only critique is that when the car was delivered there was a little more rust than I had expected, I wish that he had pointed that out, I accept some of the responsibility for not asking enough questions during our conversation. Overall I am extremely happy with the inspection service and would highly recommend Chris .

Logan

49 years of experience

82 reviews

Logan

49 years of experience

by Gary

Pontiac Grand Am L4-2.4L - Brake Drum - Manteca, California

Smh

Wesley

16 years of experience

277 reviews

Wesley

16 years of experience

by Marji

Pontiac Sunfire L4-2.2L - Brake Drum Replacement - Commerce City, Colorado

Excellent Rating

(4)

Rating Summary

3

0

1

0

0

3

0

1

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

5 Essential Things to Know About All-Wheel Drive (AWD)

All-wheel All-wheel drive (AWD) systems provide power to all four wheels, rather than only to the front or back ones. When driving, a majority of these systems have either a front or rear base, which means the power is focused...

How to Decide Between Manual and Automatic Transmissions

There There are a lot of decisions that have to be made when buying a new car. Everything from choosing a make, model, and trim level to deciding if upgrading the stereo is worth the extra money. One of the...

How to Install a Tow Bar on Your Car

Going on vacation with an RV (https://www.yourmechanic.com/article/5-essential-things-to-know-about-owning-an-rv) can be one of the most comfortable ways to travel for extended periods of time. But what happens when you get to your destination and need a vehicle to get around town? Your...

Applying brakes at stop lights and the vehicle slides.

Hello. If the brakes are staying applied and the wheels are locked but the vehicle begins to slide it is because of the slickness of the roadway. There is not going to be any way to prevent this unless you...

New Battery, New Alternator, Truck still wont start

Hello, It sounds like you may have a faulty starter relay. If the clicking noise went away after replacing the battery, it is likely that the dead battery is what caused the clicking sound as a result of being too...

I put my car in drive but it won't go but it will go in reverse what could be wrong

Hi There, What you are describing may be a result of a faulty speed sensor, potentially low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a even a faulty transmission control solenoid. As your vehicle travels down the road, the computer analyzes data being...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com