logo

Pontiac Sunbird Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(5)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Pontiac Sunbird Control Arm Assembly Replacement is $199 with $59 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Pontiac SunbirdL4-2.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$527.54Shop/Dealer Price$620.76 - $891.51
1991 Pontiac SunbirdV6-3.1LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$700.33Shop/Dealer Price$840.75 - $1257.88
1992 Pontiac SunbirdV6-3.1LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$700.33Shop/Dealer Price$840.77 - $1257.92
1990 Pontiac SunbirdL4-2.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$564.17Shop/Dealer Price$670.57 - $985.60
1993 Pontiac SunbirdV6-3.1LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$700.33Shop/Dealer Price$842.25 - $1260.50
1993 Pontiac SunbirdL4-2.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$573.71Shop/Dealer Price$682.64 - $1004.93
1994 Pontiac SunbirdV6-3.1LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$718.81Shop/Dealer Price$863.89 - $1294.91
1993 Pontiac SunbirdL4-2.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$542.87Shop/Dealer Price$633.55 - $900.17
Show example Pontiac Sunbird Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Pontiac Sunbird services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(5)
Rating Summary
5
0
0
0
0
5
0
0
0
0

Andrew

12 years of experience
962 reviews
Request Andrew
Andrew
12 years of experience
Request Andrew
by Linda
Pontiac Sunbird L4-2.0L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Kansas City, Missouri
Very good experience with this service, Andrew was a true life saver. Will definitely be using this service again. I will definitely recommend this service to everyone that needs or could use it. Thank you

Michael

41 years of experience
131 reviews
Request Michael
Michael
41 years of experience
Request Michael
by Lucyan
Pontiac Sunbird L4-2.0L - Car is overheating - Columbus, Ohio
Michael was very professional, kind, courteous, attentive. He listened to what I had to say and helped to find the solution to the problem. Thank you, Mike, for everything you did to get me back on the road. 

John

7 years of experience
35 reviews
Request John
John
7 years of experience
Request John
by Andre
Pontiac Sunbird V6-3.8L - Car does not move when I step on the gas pedal Inspection - Renton, Washington
John was super awesome and honest. He showed and explained why I needed certain things and was very helpful in making a well informed decision. Highly reccomend him.

Paul

11 years of experience
38 reviews
Request Paul
Paul
11 years of experience
Request Paul
by Chantal
Pontiac Sunbird L4-2.0L - Ignition Lock Assembly - Austin, Texas

Excellent Rating

(5)
Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Pontiac Sunbird services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

P2710 OBD-II Trouble Code: Shift Solenoid F Interm
P2710 means a problem in a shift solenoid has been detected due to a failing transmission and/or transmission components or an electrical issue.
Read more
What Do the Headlight Indicators Mean?
Headlight indicators help you know if your headlights, taillights, and high beams are on for your car.
Read more
How to Use a Hair Dryer to Remove a Dent
You can use a hair dryer to fix a dent in your car body. Use the dryer to heat the area, then apply dry ice to fix the damage on your car.
Read more

Car rattling.

This engine rattling on acceleration may be a computer reprogram that would fix if the noise is what is called pinging or pre-ignition. The problem of the noise at idle and on acceleration may be another problem and I would...
Read more

I replaced my shift solenoid B becuase it was stuck open well this shade tree mech did it now my tranny wont shift

Hello. The most common problem with the use of a shade tree mechanic is they tend to use substandard parts. Cheaper parts often lead to expensive repairs. This concept is easy to sell if you explain the likely hood of...
Read more

Lights coming on and shaking of the car

Hi, thanks for writing in. Without knowing the make and model of your car, it is hard to give guidance on what the issue may be. Luckily since the warning lights have triggered, this means that a diagnostic trouble code...
Read more
  1. Home
  2. Estimates
  3. Pontiac
  4. Sunbird
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE